=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2023.05.15 08:10:59 =~=~=~=~=~=~=~=~=~=~=~= root@nanopi:~# [ 3012.978666] RTW: send eapol packet - WPA Group Key 1/2 [ 3012.987094] RTW: recv eapol packet - WPA Group Key 2/2 [ 3012.993207] RTW: set group key camid:0, addr:ba:4d:43:13:08:61, kid:2, type:TKIP [ 3612.990378] RTW: send eapol packet - WPA Group Key 1/2 [ 3612.998881] RTW: recv eapol packet - WPA Group Key 2/2 [ 3613.005274] RTW: set group key camid:0, addr:ba:4d:43:13:08:61, kid:1, type:TKIP [ 4213.001455] RTW: send eapol packet - WPA Group Key 1/2 [ 4213.009852] RTW: recv eapol packet - WPA Group Key 2/2 [ 4213.016072] RTW: set group key camid:0, addr:ba:4d:43:13:08:61, kid:2, type:TKIP logout [ 4524.483259] RTW: clear wep or group key for addr:ba:4d:43:13:08:61, camid:0 [ 4524.493995] RTW: ERROR Free disconnecting network of scanned_queue failed due to pwlan == NULL [ 4524.493995] [ 4524.509991] RTW: ERROR Free disconnecting network of scanned_queue failed due to pwlan == NULL [ 4524.509991] [ 4524.520511] RTW: clear key for addr:00:1f:3b:70:36:19, camid:1 [ 4524.708712] RTW: OnDeAuth(ap0) reason=1, ta=00:1f:3b:70:36:19, ignore=0 [ 4524.927001] RTW: OnDeAuth(ap0) reason=1, ta=00:1f:3b:70:36:19, ignore=0 [ 4525.145515] RTW: OnDeAuth(ap0) reason=1, ta=00:1f:3b:70:36:19, ignore=0 [ 4525.363745] RTW: OnDeAuth(ap0) reason=1, ta=00:1f:3b:70:36:19, ignore=0 [àü„€ U-Boot SPL 2018.05 (Jul 15 2022 - 12:24:20 +0000) DRAM: 512 MiB Trying to boot from MMC2 U-Boot 2018.05 (Jul 15 2022 - 12:24:20 +0000) Allwinner Technology CPU: Allwinner H3 (SUN8I 1680) Model: Victron Energy NanoPi Generic DRAM: 512 MiB MMC: SUNXI SD/MMC: 0, SUNXI SD/MMC: 1 Loading Environment from MMC... OK In: serial@01c28000 Out: serial@01c28000 Err: serial@01c28000 Net: phy interface0 eth0: ethernet@1c30000 Setting bus to 0 Hit any key to stop autoboot: 2  1  0 25479 bytes read in 4 ms (6.1 MiB/s) 3825672 bytes read in 185 ms (19.7 MiB/s) ## Flattened Device Tree blob at 43000000 Booting using the fdt blob at 0x43000000 Loading Device Tree to 49ff6000, end 49fff386 ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.109-venus-8 (oe-user@oe-host) (arm-ve-linux-gnueabi-gcc (GCC) 9.3.0, GNU ld (GNU Binutils) 2.34.0.20200220) #1 SMP Wed Apr 12 23:25:53 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: MultiPlus-II [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 64 MiB at 0x5bc00000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000040000000-0x000000005fffffff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000040000000-0x000000005fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000005fffffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: Using PSCI v0.1 Function IDs from DT [ 0.000000] percpu: Embedded 15 pages/cpu s31564 r8192 d21684 u61440 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130048 [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk1p3 rootwait ro rootfstype=ext4 5 vt.global_cursor_default=0 [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 443668K/524288K available (6144K kernel code, 647K rwdata, 1304K rodata, 1024K init, 221K bss, 15084K reserved, 65536K cma-reserved, 0K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] random: get_random_bytes called from start_kernel+0x314/0x4ac with crng_init=0 [ 0.000000] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000021] Switching to timer-based delay loop, resolution 41ns [ 0.000218] Console: colour dummy device 80x30 [ 0.000287] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.000310] pid_max: default: 32768 minimum: 301 [ 0.000459] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.000475] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.001174] CPU: Testing write buffer coherency: ok [ 0.001526] /cpus/cpu@0 missing clock-frequency property [ 0.001555] /cpus/cpu@1 missing clock-frequency property [ 0.001575] /cpus/cpu@2 missing clock-frequency property [ 0.001594] /cpus/cpu@3 missing clock-frequency property [ 0.001607] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.002202] Setting up static identity map for 0x40100000 - 0x40100060 [ 0.002330] rcu: Hierarchical SRCU implementation. [ 0.002961] smp: Bringing up secondary CPUs ... [ 0.013715] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.024529] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.035283] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.035384] smp: Brought up 1 node, 4 CPUs [ 0.035413] SMP: Total of 4 processors activated (192.00 BogoMIPS). [ 0.035421] CPU: All CPU(s) started in HYP mode. [ 0.035427] CPU: Virtualization extensions available. [ 0.036113] devtmpfs: initialized [ 0.041410] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.041602] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.041630] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.043918] pinctrl core: initialized pinctrl subsystem [ 0.045099] NET: Registered protocol family 16 [ 0.046571] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.047596] thermal_sys: Registered thermal governor 'step_wise' [ 0.048006] cpuidle: using governor menu [ 0.048216] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.048228] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.065838] cryptd: max_cpu_qlen set to 1000 [ 0.067071] vdd-sys-3v3: supplied by vdd-5v [ 0.067793] iommu: Default domain type: Translated [ 0.068045] usbcore: registered new interface driver usbfs [ 0.068094] usbcore: registered new interface driver hub [ 0.068140] usbcore: registered new device driver usb [ 0.069583] clocksource: Switched to clocksource arch_sys_counter [ 0.076866] NET: Registered protocol family 2 [ 0.077055] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.077770] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 0.077801] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) [ 0.077847] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.077911] TCP: Hash tables configured (established 4096 bind 4096) [ 0.078037] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.078088] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.078245] NET: Registered protocol family 1 [ 0.079498] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available [ 0.081281] Initialise system trusted keyrings [ 0.081473] workingset: timestamp_bits=30 max_order=17 bucket_order=0 [ 0.085553] Key type asymmetric registered [ 0.085577] Asymmetric key parser 'x509' registered [ 0.086337] sun4i-usb-phy 1c19400.phy: Couldn't request ID GPIO [ 0.090141] sun8i-h3-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 0.091987] sun8i-h3-r-pinctrl 1f02c00.pinctrl: initialized sunXi PIO driver [ 0.096930] Serial: 8250/16550 driver, 8 ports [ 0.117681] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 43, base_baud = 1500000) is a U6_16550A [ 0.700338] printk: console [ttyS0] enabled [ 0.725607] 1c28400.serial: ttyS1 at MMIO 0x1c28400 (irq = 44, base_baud = 1500000) is a U6_16550A [ 0.755460] 1c28800.serial: ttyS2 at MMIO 0x1c28800 (irq = 45, base_baud = 1500000) is a U6_16550A [ 0.785278] 1c28c00.serial: ttyS3 at MMIO 0x1c28c00 (irq = 46, base_baud = 1500000) is a U6_16550A [ 0.797725] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.804289] ehci-platform: EHCI generic platform driver [ 0.810026] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.816226] ohci-platform: OHCI generic platform driver [ 0.822598] i2c /dev entries driver [ 0.826669] i2c i2c-0: using pinctrl states for GPIO recovery [ 0.832515] i2c i2c-0: using generic GPIOs for recovery [ 0.838968] at24 0-0050: 256 byte 24c02 EEPROM, read-only [ 0.847744] rtc-pcf8523 0-0068: registered as rtc0 [ 0.853972] rtc-pcf8523 0-0068: setting system clock to 2023-05-15T06:42:19 UTC (1684132939) [ 0.863069] pca953x 0-0020: using no AI [ 0.871320] sunxi-wdt 1c20ca0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=1) [ 0.879734] watchdog: watchdog0 running and kernel based pre-userspace handler disabled [ 0.889675] sunxi-mmc 1c0f000.mmc: Got CD GPIO [ 0.891660] NET: Registered protocol family 10 [ 0.899463] Segment Routing with IPv6 [ 0.903248] NET: Registered protocol family 17 [ 0.907796] Registering SWP/SWPB emulation handler [ 0.914527] registered taskstats version 1 [ 0.918665] Loading compiled-in X.509 certificates [ 0.918697] sunxi-mmc 1c11000.mmc: initialized, max. request size: 16384 KB [ 0.923502] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB [ 0.933433] vdd-vcc-dram: supplied by vdd-sys-3v3 [ 1.000467] random: fast init done [ 1.005140] mmc1: new DDR MMC card at address 0001 [ 1.010863] mmcblk1: mmc1:0001 8GTF4R 7.28 GiB [ 1.015879] mmcblk1boot0: mmc1:0001 8GTF4R partition 1 4.00 MiB [ 1.022358] mmcblk1boot1: mmc1:0001 8GTF4R partition 2 4.00 MiB [ 1.029700] mmcblk1: p1 p2 p3 p4 < p5 > [ 1.150500] ehci-platform 1c1b000.usb: EHCI Host Controller [ 1.156365] ehci-platform 1c1b000.usb: new USB bus registered, assigned bus number 1 [ 1.164498] ehci-platform 1c1b000.usb: irq 34, io mem 0x01c1b000 [ 1.199599] ehci-platform 1c1b000.usb: USB 2.0 started, EHCI 1.00 [ 1.205922] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 1.214212] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.221440] usb usb1: Product: EHCI Host Controller [ 1.226315] usb usb1: Manufacturer: Linux 5.10.109-venus-8 ehci_hcd [ 1.232589] usb usb1: SerialNumber: 1c1b000.usb [ 1.237693] hub 1-0:1.0: USB hub found [ 1.241518] hub 1-0:1.0: 1 port detected [ 1.246314] ehci-platform 1c1d000.usb: EHCI Host Controller [ 1.252132] ehci-platform 1c1d000.usb: new USB bus registered, assigned bus number 2 [ 1.260116] ehci-platform 1c1d000.usb: irq 35, io mem 0x01c1d000 [ 1.289585] ehci-platform 1c1d000.usb: USB 2.0 started, EHCI 1.00 [ 1.295853] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 1.304130] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.311359] usb usb2: Product: EHCI Host Controller [ 1.316233] usb usb2: Manufacturer: Linux 5.10.109-venus-8 ehci_hcd [ 1.322508] usb usb2: SerialNumber: 1c1d000.usb [ 1.327508] hub 2-0:1.0: USB hub found [ 1.331324] hub 2-0:1.0: 1 port detected [ 1.336052] ohci-platform 1c1d400.usb: Generic Platform OHCI controller [ 1.342890] ohci-platform 1c1d400.usb: new USB bus registered, assigned bus number 3 [ 1.350847] ohci-platform 1c1d400.usb: irq 36, io mem 0x01c1d400 [ 1.423754] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10 [ 1.432041] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.439257] usb usb3: Product: Generic Platform OHCI controller [ 1.445185] usb usb3: Manufacturer: Linux 5.10.109-venus-8 ohci_hcd [ 1.451455] usb usb3: SerialNumber: 1c1d400.usb [ 1.456434] hub 3-0:1.0: USB hub found [ 1.460289] hub 3-0:1.0: 1 port detected [ 1.468990] input: disp_keys as /devices/platform/disp_keys/input/input0 [ 1.482431] EXT4-fs (mmcblk1p3): mounted filesystem with ordered data mode. Opts: (null) [ 1.490654] VFS: Mounted root (ext4 filesystem) readonly on device 179:3. [ 1.497949] devtmpfs: mounted [ 1.502331] Freeing unused kernel memory: 1024K [ 1.529595] usb 1-1: new high-speed USB device number 2 using ehci-platform [ 1.549774] Run /sbin/init as init process INIT: version 2.96 booting[ 1.619608] usb 2-1: new high-speed USB device number 2 using ehci-platform [ 1.730840] usb 1-1: New USB device found, idVendor=0bda, idProduct=d723, bcdDevice= 2.00 [ 1.739059] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.746269] usb 1-1: Product: 802.11n WLAN Adapter [ 1.751135] usb 1-1: Manufacturer: Realtek [ 1.755303] usb 1-1: SerialNumber: 00e04c000001 [ 1.806131] EXT4-fs (mmcblk1p5): mounted filesystem with ordered data mode. Opts: (null) [ 1.821577] usb 2-1: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice= 9.01 [ 1.829870] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.837049] usb 2-1: Product: USB2.0 Hub [ 1.842292] hub 2-1:1.0: USB hub found [ 1.846614] hub 2-1:1.0: 4 ports detected data partition is fine Starting udev [ 1.941740] udevd[133]: starting version 3.2.9 [ 1.957353] random: udevd: uninitialized urandom read (16 bytes read) [ 1.964412] random: udevd: uninitialized urandom read (16 bytes read) [ 1.970983] random: udevd: uninitialized urandom read (16 bytes read) [ 2.000457] udevd[134]: starting eudev-3.2.9 [ 2.149160] gxdisp_bl 0-0051: supply vcc not found, using dummy regulator [ 2.162031] CAN device driver interface [ 2.176464] spi_master spi0: will run message pump with realtime priority [ 2.179709] usb 2-1.4: new high-speed USB device number 3 using ehci-platform [ 2.193608] mcp251xfd spi0.0 can0: MCP2518FD rev0.0 (+RX_INT -MAB_NO_WARN +CRC_REG +CRC_RX +CRC_TX +ECC -HD c:40.00MHz m:20.00MHz r:17.00MHz e:16.66MHz) successfully initialized. [ 2.207974] Bluetooth: Core ver 2.22 [ 2.213406] NET: Registered protocol family 31 [ 2.214046] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 2.217936] Bluetooth: HCI device and connection manager initialized [ 2.232289] Bluetooth: HCI socket layer initialized [ 2.237196] Bluetooth: L2CAP socket layer initialized [ 2.249396] lima 1c40000.gpu: gp - mali400 version major 1 minor 1 [ 2.255895] lima 1c40000.gpu: pp0 - mali400 version major 1 minor 1 [ 2.262479] lima 1c40000.gpu: pp1 - mali400 version major 1 minor 1 [ 2.268870] lima 1c40000.gpu: l2 cache 64K, 4-way, 64byte cache line, 64bit external bus [ 2.279233] lima 1c40000.gpu: bus rate = 200000000 [ 2.284346] lima 1c40000.gpu: mod rate = 297000000 [ 2.289391] lima 1c40000.gpu: dev_pm_opp_set_regulators: no regulator (mali) found: -19 [ 2.310419] usbcore: registered new interface driver btusb [ 2.312123] dwmac-sun8i 1c30000.ethernet: IRQ eth_wake_irq not found [ 2.322558] dwmac-sun8i 1c30000.ethernet: IRQ eth_lpi not found [ 2.328111] lima 1c40000.gpu: Failed to register cooling device [ 2.328654] dwmac-sun8i 1c30000.ethernet: No regulator found [ 2.335924] [drm] Initialized lima 1.1.0 20191231 for 1c40000.gpu on minor 0 [ 2.340518] dwmac-sun8i 1c30000.ethernet: PTP uses main clock [ 2.343595] Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000d lmp_ver=08 lmp_subver=8723 [ 2.344868] Bluetooth: hci0: RTL: rom_version status=0 version=2 [ 2.344880] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723d_fw.bin [ 2.347489] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723d_config.bin [ 2.353399] dwmac-sun8i 1c30000.ethernet: Current syscon value is not the default 148000 (expect 58000) [ 2.355880] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 2.358240] dwmac-sun8i 1c30000.ethernet: No HW DMA feature register supported [ 2.358249] dwmac-sun8i 1c30000.ethernet: RX Checksum Offload Engine supported [ 2.358259] dwmac-sun8i 1c30000.ethernet: COE Type 2 [ 2.358264] dwmac-sun8i 1c30000.ethernet: TX Checksum insertion supported [ 2.358272] dwmac-sun8i 1c30000.ethernet: Normal descriptors [ 2.358277] dwmac-sun8i 1c30000.ethernet: Chain mode enabled [ 2.360533] dwmac-sun8i 1c30000.ethernet: Found internal PHY node [ 2.361157] dwmac-sun8i 1c30000.ethernet: Switch mux to internal PHY [ 2.361172] dwmac-sun8i 1c30000.ethernet: Powering internal PHY [ 2.452972] usb 2-1.4: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11 [ 2.457003] Bluetooth: hci0: RTL: cfg_sz 10, total sz 33266 [ 2.461549] usb 2-1.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.461575] usb 2-1.4: Product: USB 2.0 Hub [ 2.480323] hub 2-1.4:1.0: USB hub found [ 2.485912] hub 2-1.4:1.0: 4 ports detected [ 2.499019] 8723du: loading out-of-tree module taints kernel. [ 2.541160] RTW: module init start [ 2.544817] RTW: rtl8723du v5.13.4-17-ga6e5ee6.20210514_COEX20200103-3535 [ 2.552109] RTW: build time: Apr 12 2023 23:27:25 [ 2.557064] RTW: rtl8723du BT-Coex version = COEX20200103-3535 [ 2.765903] Bluetooth: hci0: RTL: fw version 0x828a96f1 [ 2.775394] RTW: HW EFUSE [ 2.778131] RTW: 0x000: 29 81 00 7C 01 88 07 00 A0 04 EC 35 12 C0 A2 D8 [ 2.785610] RTW: 0x010: 24 28 28 29 24 24 26 2A 2A 2B 26 02 FF FF FF FF [ 2.792833] RTW: 0x020: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.799963] RTW: 0x030: FF FF FF FF FF FF FF FF FF FF 27 27 27 25 25 25 [ 2.807068] RTW: 0x040: 29 29 29 27 27 02 FF FF FF FF FF FF FF FF FF FF [ 2.814181] RTW: 0x050: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.821345] RTW: 0x060: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.828500] RTW: 0x070: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.835664] RTW: 0x080: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.842823] RTW: 0x090: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.849972] RTW: 0x0A0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.857095] RTW: 0x0B0: FF FF FF FF FF FF FF FF 20 1B 1D 00 00 00 FF FF [ 2.864230] RTW: 0x0C0: FF 29 20 51 00 E6 00 FF 00 FF 11 FF FF FF FF FF [ 2.871360] RTW: 0x0D0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.878482] RTW: 0x0E0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.885610] RTW: 0x0F0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.892741] RTW: 0x100: DA 0B 23 D7 C7 46 07 B8 4D 43 13 08 61 09 03 52 [ 2.900232] RTW: 0x110: 65 61 6C 74 65 6B 16 03 38 30 32 2E 31 31 6E 20 [ 2.907390] RTW: 0x120: 57 4C 41 4E 20 41 64 61 70 74 65 72 00 FF FF FF [ 2.909590] usb 2-1.4.1: new full-speed USB device number 4 using ehci-platform [ 2.914519] RTW: 0x130: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.928951] RTW: 0x140: FF FF FF FF FF FF FF 0F FF FF FF FF FF FF FF FF [ 2.936083] RTW: 0x150: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.943249] RTW: 0x160: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.950378] RTW: 0x170: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.957854] RTW: 0x180: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.965039] RTW: 0x190: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.972169] RTW: 0x1A0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.979293] RTW: 0x1B0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.986636] RTW: 0x1C0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.993911] RTW: 0x1D0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 3.001468] RTW: 0x1E0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 3.008670] RTW: 0x1F0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 3.016000] RTW: hal_com_config_channel_plan chplan:0x20 [ 3.104348] RTW: [RF_PATH] ver_id.RF_TYPE:RF_1T1R [ 3.109073] RTW: [RF_PATH] HALSPEC's rf_reg_trx_path_bmp:0x11, rf_reg_path_avail_num:1, max_tx_cnt:1 [ 3.118226] RTW: [RF_PATH] PG's trx_path_bmp:0x00, max_tx_cnt:0 [ 3.124160] RTW: [RF_PATH] Registry's trx_path_bmp:0x00, tx_path_lmt:0, rx_path_lmt:0 [ 3.131994] RTW: [RF_PATH] HALDATA's trx_path_bmp:0x11, max_tx_cnt:1 [ 3.138341] RTW: [RF_PATH] HALDATA's rf_type:RF_1T1R, NumTotalRFPath:1 [ 3.144881] RTW: [TRX_Nss] HALSPEC - tx_nss:1, rx_nss:1 [ 3.150113] RTW: [TRX_Nss] Registry - tx_nss:0, rx_nss:0 [ 3.155419] RTW: [TRX_Nss] HALDATA - tx_nss:1, rx_nss:1 [ 3.160650] RTW: txpath=0x1, rxpath=0x1 [ 3.164484] RTW: txpath_1ss:0x1, num:1 [ 3.169465] RTW: rtw_regsty_chk_target_tx_power_valid return _FALSE for band:0, path:0, rs:0, t:-1 [ 3.180948] RTW: rtw_ndev_init(wlan0) if1 mac_addr=b8:4d:43:13:08:61 [ 3.183091] urandom_read: 2 callbacks suppressed [ 3.183103] random: udevd: uninitialized urandom read (16 bytes read) [ 3.188807] RTW: rtw_ndev_init(wlan1) if2 mac_addr=ba:4d:43:13:08:61 [ 3.195549] random: udevd: uninitialized urandom read (16 bytes read) [ 3.200501] usbcore: registered new interface driver rtl8723du [ 3.217309] RTW: module init ret=0 [ 3.237621] usb 2-1.4.1: New USB device found, idVendor=0403, idProduct=6001, bcdDevice= 6.00 [ 3.246411] usb 2-1.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.254089] usb 2-1.4.1: Product: FT232R USB UART [ 3.258074] rtl8723du 1-1:1.2 ap0: renamed from wlan1 [ 3.258852] usb 2-1.4.1: Manufacturer: FTDI [ 3.268213] usb 2-1.4.1: SerialNumber: A10N54RA [ 3.286439] usbcore: registered new interface driver usbserial_generic [ 3.293264] usbserial: USB Serial support registered for generic [ 3.300932] rtl8723du 1-1:1.2 wifi0: renamed from wlan0 [ 3.306826] usbcore: registered new interface driver ftdi_sio [ 3.312928] usbserial: USB Serial support registered for FTDI USB Serial Device [ 3.320688] ftdi_sio 2-1.4.1:1.0: FTDI USB Serial Device converter detected [ 3.327944] usb 2-1.4.1: Detected FT232RL [ 3.334243] usb 2-1.4.1: FTDI USB Serial Device converter now attached to ttyUSB0 [ 3.442526] EXT4-fs (mmcblk1p3): re-mounted. Opts: (null) [ 3.469721] usb 2-1.4.3: new full-speed USB device number 5 using ehci-platform [ 3.729443] usb 2-1.4.3: New USB device found, idVendor=0403, idProduct=6015, bcdDevice=10.00 [ 3.738095] usb 2-1.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.745668] usb 2-1.4.3: Product: VE Direct cable [ 3.750400] usb 2-1.4.3: Manufacturer: VictronEnergy BV [ 3.755685] usb 2-1.4.3: SerialNumber: VE72YKGL [ 3.764158] ftdi_sio 2-1.4.3:1.0: FTDI USB Serial Device converter detected [ 3.771574] usb 2-1.4.3: Detected FT-X [ 3.776804] usb 2-1.4.3: FTDI USB Serial Device converter now attached to ttyUSB1 [ 3.979784] usb 2-1.4.4: new full-speed USB device number 6 using ehci-platform [ 4.180458] random: dd: uninitialized urandom read (512 bytes read) [ 4.239203] usb 2-1.4.4: New USB device found, idVendor=0403, idProduct=6015, bcdDevice=10.00 [ 4.247872] usb 2-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.251560] random: eeprom: uninitialized urandom read (24 bytes read) [ 4.255381] usb 2-1.4.4: Product: VE Direct cable [ 4.266597] usb 2-1.4.4: Manufacturer: VictronEnergy BV [ 4.271852] usb 2-1.4.4: SerialNumber: VE73U55L [ 4.280186] ftdi_sio 2-1.4.4:1.0: FTDI USB Serial Device converter detected [ 4.287481] usb 2-1.4.4: Detected FT-X [ 4.292944] usb 2-1.4.4: FTDI USB Serial Device converter now attached to ttyUSB2 Starting watchdog [ 4.911219] watchdog: watchdog0: watchdog did not stop! INIT: Entering runlevel: 5 Configuring network interfaces... done. [ 5.718450] random: dbus-uuidgen: uninitialized urandom read (12 bytes read) Starting system message bus: Setting up watches. Watches established. /var/run/dbus/ CREATE system_bus_socket Starting haveged: haveged: command socket is listening at fd 3 haveged: haveged starting up [ OK ] Starting bluetooth: bluetoothd. starting DNS forwarder and DHCP server: dnsmasq... done. starting DNS forwarder and DHCP server: dnsmasq.ap... done. [ 5.956207] NET: Registered protocol family 38 Starting syslogd/klogd: done * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon [ ok ] Starting php-fpm done Starting Connection Manager Starting Hiawatha Web Server: hiawatha. starting IPv4LL configuration daemon: avahi-autoipd... done. starting resolv.conf manager: resolv-watch... done. dbus-daemon[568]: [system] Activating service name='fi.w1.wpa_supplicant1' requested by ':1.2' (uid=0 pid=642 comm="connmand --nodnsproxy --nodaemon ") (using servicehelper) Starting crond: [ 6.623947] dwmac-sun8i 1c30000.ethernet eth0: PHY [0.1:01] driver [Generic PHY] (irq=POLL) [ 6.634264] dwmac-sun8i 1c30000.ethernet eth0: No Safety Features support found [ 6.641787] dwmac-sun8i 1c30000.ethernet eth0: No MAC Management Counters available [ 6.649517] dwmac-sun8i 1c30000.ethernet eth0: PTP not supported by HW OK [ 6.664122] dwmac-sun8i 1c30000.ethernet eth0: configuring for phy/mii link mode dbus-daemon[568]: [system] Successfully activated service 'fi.w1.wpa_supplicant1' Checking available software versions... Active rootfs: 2 Active version: 20230412212730 v2.94 [ 8.173888] random: crng init done [ 9.079415] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) Backup version: 20220715122339 v2.89 Last login: Mon May 15 05:25:19 +0000 2023 on /dev/ttyS0. root@nanopi:~# [ 11.531788] can: controller area network core [ 11.536446] NET: Registered protocol family 29 [ 11.687499] IPv6: ADDRCONF(NETDEV_CHANGE): can0: link becomes ready [ 12.366433] can: raw protocol [ 12.878233] RTW: port switch - port0(ap0), port1(wifi0) [ 13.526791] RTW: assoc success [ 13.532840] IPv6: ADDRCONF(NETDEV_CHANGE): ap0: link becomes ready [ 13.551742] RTW: set group key camid:0, addr:ba:4d:43:13:08:61, kid:1, type:TKIP [ 13.677351] NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!! [ 14.212587] NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!! [ 15.153204] NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!! [ 17.106711] NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!! [ 18.074090] NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!! [ 18.082927] NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!! [ 18.102915] NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!! [ 18.111640] NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!! [ 18.153175] NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!! [ 18.161615] NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!! [ 69.261231] RTW: ============ STA [00:1f:3b:70:36:19] =================== [ 69.268245] RTW: mac_id : 2 [ 69.271136] RTW: wireless_mode : 0x03 [ 69.274881] RTW: mimo_type : 0 [ 69.277947] RTW: static smps : N [ 69.281230] RTW: bw_mode : 20MHz, ra_bw_mode : 20MHz [ 69.286261] RTW: rate_id : 6 [ 69.289175] RTW: rssi : -1 (%), rssi_level : 0 [ 69.293688] RTW: is_support_sgi : N, is_vht_enable : N [ 69.298855] RTW: disable_ra : N, disable_pt : N [ 69.303455] RTW: is_noisy : N [ 69.306514] RTW: txrx_state : 0 [ 69.309768] RTW: curr_tx_rate : CCK_1M (L) [ 69.313932] RTW: curr_tx_bw : 20MHz [ 69.317435] RTW: curr_retry_ratio : 0 [ 69.321168] RTW: ra_mask : 0x0000000000000fff [ 69.321168] [ 69.329664] RTW: set group key camid:0, addr:ba:4d:43:13:08:61, kid:1, type:TKIP [ 69.330128] RTW: send eapol packet 1/4 [ 69.347262] RTW: recv eapol packet 2/4 [ 69.351838] RTW: send eapol packet 3/4 [ 69.358616] RTW: recv eapol packet 4/4 [ 69.362974] RTW: set pairwise key camid:1, addr:00:1f:3b:70:36:19, kid:0, type:TKIP [ 613.015648] RTW: send eapol packet - WPA Group Key 1/2 [ 613.052587] RTW: recv eapol packet - WPA Group Key 2/2 [ 613.059037] RTW: set group key camid:0, addr:ba:4d:43:13:08:61, kid:2, type:TKIP [ 616.502661] mcp251xfd spi0.0 can0: CRC read error at address 0x0010 (length=4, data=80 f3 13 a2, CRC=0x07e9) retrying. [ 1213.022837] RTW: send eapol packet - WPA Group Key 1/2 [ 1213.031314] RTW: recv eapol packet - WPA Group Key 2/2 [ 1213.037621] RTW: set group key camid:0, addr:ba:4d:43:13:08:61, kid:1, type:TKIP [ 1813.037541] RTW: send eapol packet - WPA Group Key 1/2 [ 1813.046041] RTW: recv eapol packet - WPA Group Key 2/2 [ 1813.052257] RTW: set group key camid:0, addr:ba:4d:43:13:08:61, kid:2, type:TKIP [ 2052.316020] mcp251xfd spi0.0 can0: CRC read error at address 0x0010 (length=4, data=54 56 55 01, CRC=0x88ed) retrying. [ 2413.050450] RTW: send eapol packet - WPA Group Key 1/2 [ 2413.058952] RTW: recv eapol packet - WPA Group Key 2/2 [ 2413.065331] RTW: set group key camid:0, addr:ba:4d:43:13:08:61, kid:1, type:TKIP [ 3013.060472] RTW: send eapol packet - WPA Group Key 1/2 [ 3013.068976] RTW: recv eapol packet - WPA Group Key 2/2 [ 3013.076621] RTW: set group key camid:0, addr:ba:4d:43:13:08:61, kid:2, type:TKIP [ 3613.070436] RTW: send eapol packet - WPA Group Key 1/2 [ 3613.078961] RTW: recv eapol packet - WPA Group Key 2/2 [ 3613.085126] RTW: set group key camid:0, addr:ba:4d:43:13:08:61, kid:1, type:TKIP [ 4213.080482] RTW: send eapol packet - WPA Group Key 1/2 [ 4213.088932] RTW: recv eapol packet - WPA Group Key 2/2 [ 4213.095186] RTW: set group key camid:0, addr:ba:4d:43:13:08:61, kid:2, type:TKIP haveged: haveged: Stopping due to signal 15 logout [ 4520.029007] RTW: clear wep or group key for addr:ba:4d:43:13:08:61, camid:0 [ 4520.044830] RTW: ERROR Free disconnecting network of scanned_queue failed due to pwlan == NULL [ 4520.044830] [ 4520.062077] RTW: ERROR Free disconnecting network of scanned_queue failed due to pwlan == NULL [ 4520.062077] [ 4520.073015] RTW: clear key for addr:00:1f:3b:70:36:19, camid:1 [ 4520.254299] RTW: OnDeAuth(ap0) reason=1, ta=00:1f:3b:70:36:19, ignore=0 [ 4520.472590] RTW: OnDeAuth(ap0) reason=1, ta=00:1f:3b:70:36:19, ignore=0 [ 4520.690946] RTW: OnDeAuth(ap0) reason=1, ta=00:1f:3b:70:36:19, ignore=0 [ 4520.909325] RTW: OnDeAuth(ap0) reason=1, ta=00:1f:3b:70:36:19, ignore=0 ² U-Boot SPL 2018.05 (Jul 15 2022 - 12:24:20 +0000) DRAM: 512 MiB Trying to boot from MMC2 U-Boot 2018.05 (Jul 15 2022 - 12:24:20 +0000) Allwinner Technology CPU: Allwinner H3 (SUN8I 1680) Model: Victron Energy NanoPi Generic DRAM: 512 MiB MMC: SUNXI SD/MMC: 0, SUNXI SD/MMC: 1 Loading Environment from MMC... OK In: serial@01c28000 Out: serial@01c28000 Err: serial@01c28000 Net: phy interface0 eth0: ethernet@1c30000 Setting bus to 0 Hit any key to stop autoboot: 2  1  0 25479 bytes read in 4 ms (6.1 MiB/s) 3825672 bytes read in 185 ms (19.7 MiB/s) ## Flattened Device Tree blob at 43000000 Booting using the fdt blob at 0x43000000 Loading Device Tree to 49ff6000, end 49fff386 ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.109-venus-8 (oe-user@oe-host) (arm-ve-linux-gnueabi-gcc (GCC) 9.3.0, GNU ld (GNU Binutils) 2.34.0.20200220) #1 SMP Wed Apr 12 23:25:53 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: MultiPlus-II [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 64 MiB at 0x5bc00000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000040000000-0x000000005fffffff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000040000000-0x000000005fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000005fffffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: Using PSCI v0.1 Function IDs from DT [ 0.000000] percpu: Embedded 15 pages/cpu s31564 r8192 d21684 u61440 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130048 [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk1p3 rootwait ro rootfstype=ext4 5 vt.global_cursor_default=0 [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 443668K/524288K available (6144K kernel code, 647K rwdata, 1304K rodata, 1024K init, 221K bss, 15084K reserved, 65536K cma-reserved, 0K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] random: get_random_bytes called from start_kernel+0x314/0x4ac with crng_init=0 [ 0.000000] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000021] Switching to timer-based delay loop, resolution 41ns [ 0.000219] Console: colour dummy device 80x30 [ 0.000288] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.000310] pid_max: default: 32768 minimum: 301 [ 0.000456] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.000473] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.001179] CPU: Testing write buffer coherency: ok [ 0.001534] /cpus/cpu@0 missing clock-frequency property [ 0.001562] /cpus/cpu@1 missing clock-frequency property [ 0.001581] /cpus/cpu@2 missing clock-frequency property [ 0.001599] /cpus/cpu@3 missing clock-frequency property [ 0.001612] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.002201] Setting up static identity map for 0x40100000 - 0x40100060 [ 0.002332] rcu: Hierarchical SRCU implementation. [ 0.002964] smp: Bringing up secondary CPUs ... [ 0.013722] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.024532] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.035283] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.035383] smp: Brought up 1 node, 4 CPUs [ 0.035410] SMP: Total of 4 processors activated (192.00 BogoMIPS). [ 0.035418] CPU: All CPU(s) started in HYP mode. [ 0.035425] CPU: Virtualization extensions available. [ 0.036116] devtmpfs: initialized [ 0.041420] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.041608] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.041638] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.043925] pinctrl core: initialized pinctrl subsystem [ 0.045108] NET: Registered protocol family 16 [ 0.046576] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.047600] thermal_sys: Registered thermal governor 'step_wise' [ 0.048001] cpuidle: using governor menu [ 0.048210] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.048222] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.065830] cryptd: max_cpu_qlen set to 1000 [ 0.067058] vdd-sys-3v3: supplied by vdd-5v [ 0.067789] iommu: Default domain type: Translated [ 0.068037] usbcore: registered new interface driver usbfs [ 0.068087] usbcore: registered new interface driver hub [ 0.068133] usbcore: registered new device driver usb [ 0.069582] clocksource: Switched to clocksource arch_sys_counter [ 0.076825] NET: Registered protocol family 2 [ 0.077039] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.077779] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 0.077812] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) [ 0.077859] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.077922] TCP: Hash tables configured (established 4096 bind 4096) [ 0.078052] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.078102] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.078259] NET: Registered protocol family 1 [ 0.079612] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available [ 0.081332] Initialise system trusted keyrings [ 0.081536] workingset: timestamp_bits=30 max_order=17 bucket_order=0 [ 0.085577] Key type asymmetric registered [ 0.085600] Asymmetric key parser 'x509' registered [ 0.086340] sun4i-usb-phy 1c19400.phy: Couldn't request ID GPIO [ 0.090084] sun8i-h3-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 0.091953] sun8i-h3-r-pinctrl 1f02c00.pinctrl: initialized sunXi PIO driver [ 0.096939] Serial: 8250/16550 driver, 8 ports [ 0.117644] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 43, base_baud = 1500000) is a U6_16550A [ 0.700477] printk: console [ttyS0] enabled [ 0.725747] 1c28400.serial: ttyS1 at MMIO 0x1c28400 (irq = 44, base_baud = 1500000) is a U6_16550A [ 0.755547] 1c28800.serial: ttyS2 at MMIO 0x1c28800 (irq = 45, base_baud = 1500000) is a U6_16550A [ 0.785404] 1c28c00.serial: ttyS3 at MMIO 0x1c28c00 (irq = 46, base_baud = 1500000) is a U6_16550A [ 0.797869] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.804437] ehci-platform: EHCI generic platform driver [ 0.810104] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.816300] ohci-platform: OHCI generic platform driver [ 0.822594] i2c /dev entries driver [ 0.826643] i2c i2c-0: using pinctrl states for GPIO recovery [ 0.832492] i2c i2c-0: using generic GPIOs for recovery [ 0.838955] at24 0-0050: 256 byte 24c02 EEPROM, read-only [ 0.847749] rtc-pcf8523 0-0068: registered as rtc0 [ 0.853989] rtc-pcf8523 0-0068: setting system clock to 2023-05-15T07:59:27 UTC (1684137567) [ 0.863098] pca953x 0-0020: using no AI [ 0.871374] sunxi-wdt 1c20ca0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=1) [ 0.879844] watchdog: watchdog0 running and kernel based pre-userspace handler disabled [ 0.889851] sunxi-mmc 1c0f000.mmc: Got CD GPIO [ 0.891843] NET: Registered protocol family 10 [ 0.899756] Segment Routing with IPv6 [ 0.903502] NET: Registered protocol family 17 [ 0.908045] Registering SWP/SWPB emulation handler [ 0.914645] registered taskstats version 1 [ 0.915085] sunxi-mmc 1c11000.mmc: initialized, max. request size: 16384 KB [ 0.918758] Loading compiled-in X.509 certificates [ 0.919621] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB [ 0.947403] vdd-vcc-dram: supplied by vdd-sys-3v3 [ 0.994446] random: fast init done [ 0.997990] mmc1: new DDR MMC card at address 0001 [ 1.003736] mmcblk1: mmc1:0001 8GTF4R 7.28 GiB [ 1.008757] mmcblk1boot0: mmc1:0001 8GTF4R partition 1 4.00 MiB [ 1.015331] mmcblk1boot1: mmc1:0001 8GTF4R partition 2 4.00 MiB [ 1.022898] mmcblk1: p1 p2 p3 p4 < p5 > [ 1.170514] ehci-platform 1c1b000.usb: EHCI Host Controller [ 1.176400] ehci-platform 1c1b000.usb: new USB bus registered, assigned bus number 1 [ 1.184520] ehci-platform 1c1b000.usb: irq 34, io mem 0x01c1b000 [ 1.219592] ehci-platform 1c1b000.usb: USB 2.0 started, EHCI 1.00 [ 1.225904] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 1.234190] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.241416] usb usb1: Product: EHCI Host Controller [ 1.246291] usb usb1: Manufacturer: Linux 5.10.109-venus-8 ehci_hcd [ 1.252565] usb usb1: SerialNumber: 1c1b000.usb [ 1.257629] hub 1-0:1.0: USB hub found [ 1.261444] hub 1-0:1.0: 1 port detected [ 1.266239] ehci-platform 1c1d000.usb: EHCI Host Controller [ 1.272053] ehci-platform 1c1d000.usb: new USB bus registered, assigned bus number 2 [ 1.280032] ehci-platform 1c1d000.usb: irq 35, io mem 0x01c1d000 [ 1.309586] ehci-platform 1c1d000.usb: USB 2.0 started, EHCI 1.00 [ 1.315855] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 1.324135] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.331363] usb usb2: Product: EHCI Host Controller [ 1.336237] usb usb2: Manufacturer: Linux 5.10.109-venus-8 ehci_hcd [ 1.342512] usb usb2: SerialNumber: 1c1d000.usb [ 1.347532] hub 2-0:1.0: USB hub found [ 1.351336] hub 2-0:1.0: 1 port detected [ 1.356041] ohci-platform 1c1d400.usb: Generic Platform OHCI controller [ 1.362872] ohci-platform 1c1d400.usb: new USB bus registered, assigned bus number 3 [ 1.370828] ohci-platform 1c1d400.usb: irq 36, io mem 0x01c1d400 [ 1.443748] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10 [ 1.452034] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.459248] usb usb3: Product: Generic Platform OHCI controller [ 1.465177] usb usb3: Manufacturer: Linux 5.10.109-venus-8 ohci_hcd [ 1.471447] usb usb3: SerialNumber: 1c1d400.usb [ 1.476444] hub 3-0:1.0: USB hub found [ 1.480321] hub 3-0:1.0: 1 port detected [ 1.489023] input: disp_keys as /devices/platform/disp_keys/input/input0 [ 1.502613] EXT4-fs (mmcblk1p3): mounted filesystem with ordered data mode. Opts: (null) [ 1.510853] VFS: Mounted root (ext4 filesystem) readonly on device 179:3. [ 1.518135] devtmpfs: mounted [ 1.522520] Freeing unused kernel memory: 1024K [ 1.549585] usb 1-1: new high-speed USB device number 2 using ehci-platform [ 1.559735] Run /sbin/init as init process INIT: version 2.96 booting[ 1.649596] usb 2-1: new high-speed USB device number 2 using ehci-platform [ 1.750869] usb 1-1: New USB device found, idVendor=0bda, idProduct=d723, bcdDevice= 2.00 [ 1.759096] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.766317] usb 1-1: Product: 802.11n WLAN Adapter [ 1.771197] usb 1-1: Manufacturer: Realtek [ 1.775342] usb 1-1: SerialNumber: 00e04c000001 [ 1.814552] EXT4-fs (mmcblk1p5): mounted filesystem with ordered data mode. Opts: (null) [ 1.851501] usb 2-1: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice= 9.01 [ 1.859744] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.866912] usb 2-1: Product: USB2.0 Hub [ 1.871909] hub 2-1:1.0: USB hub found [ 1.876130] hub 2-1:1.0: 4 ports detected data partition is fine Starting udev [ 1.958373] udevd[134]: starting version 3.2.9 [ 1.974032] random: udevd: uninitialized urandom read (16 bytes read) [ 1.981060] random: udevd: uninitialized urandom read (16 bytes read) [ 1.987586] random: udevd: uninitialized urandom read (16 bytes read) [ 2.016601] udevd[135]: starting eudev-3.2.9 [ 2.175319] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 2.186263] CAN device driver interface [ 2.206744] gxdisp_bl 0-0051: supply vcc not found, using dummy regulator [ 2.212892] spi_master spi0: will run message pump with realtime priority [ 2.213635] Bluetooth: Core ver 2.22 [ 2.214142] usb 2-1.4: new high-speed USB device number 3 using ehci-platform [ 2.231472] NET: Registered protocol family 31 [ 2.235952] Bluetooth: HCI device and connection manager initialized [ 2.242442] Bluetooth: HCI socket layer initialized [ 2.247357] Bluetooth: L2CAP socket layer initialized [ 2.254507] lima 1c40000.gpu: gp - mali400 version major 1 minor 1 [ 2.261033] lima 1c40000.gpu: pp0 - mali400 version major 1 minor 1 [ 2.267521] lima 1c40000.gpu: pp1 - mali400 version major 1 minor 1 [ 2.272089] mcp251xfd spi0.0 can0: MCP2518FD rev0.0 (+RX_INT -MAB_NO_WARN +CRC_REG +CRC_RX +CRC_TX +ECC -HD c:40.00MHz m:20.00MHz r:17.00MHz e:16.66MHz) successfully initialized. [ 2.274039] lima 1c40000.gpu: l2 cache 64K, 4-way, 64byte cache line, 64bit external bus [ 2.290885] usbcore: registered new interface driver btusb [ 2.291517] dwmac-sun8i 1c30000.ethernet: IRQ eth_wake_irq not found [ 2.291529] dwmac-sun8i 1c30000.ethernet: IRQ eth_lpi not found [ 2.291647] dwmac-sun8i 1c30000.ethernet: No regulator found [ 2.291796] dwmac-sun8i 1c30000.ethernet: PTP uses main clock [ 2.291838] dwmac-sun8i 1c30000.ethernet: Current syscon value is not the default 148000 (expect 58000) [ 2.304482] dwmac-sun8i 1c30000.ethernet: No HW DMA feature register supported [ 2.314970] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 2.316116] dwmac-sun8i 1c30000.ethernet: RX Checksum Offload Engine supported [ 2.316138] Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000d lmp_ver=08 lmp_subver=8723 [ 2.320208] lima 1c40000.gpu: bus rate = 200000000 [ 2.320227] lima 1c40000.gpu: mod rate = 297000000 [ 2.320380] lima 1c40000.gpu: dev_pm_opp_set_regulators: no regulator (mali) found: -19 [ 2.328341] Bluetooth: hci0: RTL: rom_version status=0 version=2 [ 2.337895] dwmac-sun8i 1c30000.ethernet: COE Type 2 [ 2.345167] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723d_fw.bin [ 2.385981] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723d_config.bin [ 2.391681] dwmac-sun8i 1c30000.ethernet: TX Checksum insertion supported [ 2.393432] lima 1c40000.gpu: Failed to register cooling device [ 2.394003] [drm] Initialized lima 1.1.0 20191231 for 1c40000.gpu on minor 0 [ 2.416322] Bluetooth: hci0: RTL: cfg_sz 10, total sz 33266 [ 2.422003] dwmac-sun8i 1c30000.ethernet: Normal descriptors [ 2.440596] dwmac-sun8i 1c30000.ethernet: Chain mode enabled [ 2.440607] usb 2-1.4: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11 [ 2.440625] usb 2-1.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.449166] dwmac-sun8i 1c30000.ethernet: Found internal PHY node [ 2.454670] usb 2-1.4: Product: USB 2.0 Hub [ 2.462580] hub 2-1.4:1.0: USB hub found [ 2.469241] dwmac-sun8i 1c30000.ethernet: Switch mux to internal PHY [ 2.476657] hub 2-1.4:1.0: 4 ports detected [ 2.483215] dwmac-sun8i 1c30000.ethernet: Powering internal PHY [ 2.528887] 8723du: loading out-of-tree module taints kernel. [ 2.570543] RTW: module init start [ 2.574048] RTW: rtl8723du v5.13.4-17-ga6e5ee6.20210514_COEX20200103-3535 [ 2.581024] RTW: build time: Apr 12 2023 23:27:25 [ 2.585807] RTW: rtl8723du BT-Coex version = COEX20200103-3535 [ 2.764650] Bluetooth: hci0: RTL: fw version 0x828a96f1 [ 2.770493] RTW: HW EFUSE [ 2.773139] RTW: 0x000: 29 81 00 7C 01 88 07 00 A0 04 EC 35 12 C0 A2 D8 [ 2.780390] RTW: 0x010: 24 28 28 29 24 24 26 2A 2A 2B 26 02 FF FF FF FF [ 2.787555] RTW: 0x020: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.794725] RTW: 0x030: FF FF FF FF FF FF FF FF FF FF 27 27 27 25 25 25 [ 2.801887] RTW: 0x040: 29 29 29 27 27 02 FF FF FF FF FF FF FF FF FF FF [ 2.809041] RTW: 0x050: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.816196] RTW: 0x060: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.823344] RTW: 0x070: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.830480] RTW: 0x080: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.837604] RTW: 0x090: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.844734] RTW: 0x0A0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.851863] RTW: 0x0B0: FF FF FF FF FF FF FF FF 20 1B 1D 00 00 00 FF FF [ 2.858982] RTW: 0x0C0: FF 29 20 51 00 E6 00 FF 00 FF 11 FF FF FF FF FF [ 2.866110] RTW: 0x0D0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.873240] RTW: 0x0E0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.880370] RTW: 0x0F0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.887621] RTW: 0x100: DA 0B 23 D7 C7 46 07 B8 4D 43 13 08 61 09 03 52 [ 2.894886] RTW: 0x110: 65 61 6C 74 65 6B 16 03 38 30 32 2E 31 31 6E 20 [ 2.902038] RTW: 0x120: 57 4C 41 4E 20 41 64 61 70 74 65 72 00 FF FF FF [ 2.909163] RTW: 0x130: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.916292] RTW: 0x140: FF FF FF FF FF FF FF 0F FF FF FF FF FF FF FF FF [ 2.919589] usb 2-1.4.1: new full-speed USB device number 4 using ehci-platform [ 2.923426] RTW: 0x150: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.937932] RTW: 0x160: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.945079] RTW: 0x170: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.952582] RTW: 0x180: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.959759] RTW: 0x190: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.966866] RTW: 0x1A0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.974004] RTW: 0x1B0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.981186] RTW: 0x1C0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.988342] RTW: 0x1D0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.995836] RTW: 0x1E0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 3.003007] RTW: 0x1F0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 3.010360] RTW: hal_com_config_channel_plan chplan:0x20 [ 3.097577] RTW: [RF_PATH] ver_id.RF_TYPE:RF_1T1R [ 3.102457] RTW: [RF_PATH] HALSPEC's rf_reg_trx_path_bmp:0x11, rf_reg_path_avail_num:1, max_tx_cnt:1 [ 3.111672] RTW: [RF_PATH] PG's trx_path_bmp:0x00, max_tx_cnt:0 [ 3.117652] RTW: [RF_PATH] Registry's trx_path_bmp:0x00, tx_path_lmt:0, rx_path_lmt:0 [ 3.125508] RTW: [RF_PATH] HALDATA's trx_path_bmp:0x11, max_tx_cnt:1 [ 3.131879] RTW: [RF_PATH] HALDATA's rf_type:RF_1T1R, NumTotalRFPath:1 [ 3.138403] RTW: [TRX_Nss] HALSPEC - tx_nss:1, rx_nss:1 [ 3.143638] RTW: [TRX_Nss] Registry - tx_nss:0, rx_nss:0 [ 3.148944] RTW: [TRX_Nss] HALDATA - tx_nss:1, rx_nss:1 [ 3.154210] RTW: txpath=0x1, rxpath=0x1 [ 3.158049] RTW: txpath_1ss:0x1, num:1 [ 3.163148] RTW: rtw_regsty_chk_target_tx_power_valid return _FALSE for band:0, path:0, rs:0, t:-1 [ 3.174751] RTW: rtw_ndev_init(wlan0) if1 mac_addr=b8:4d:43:13:08:61 [ 3.176792] urandom_read: 2 callbacks suppressed [ 3.176805] random: udevd: uninitialized urandom read (16 bytes read) [ 3.183033] RTW: rtw_ndev_init(wlan1) if2 mac_addr=ba:4d:43:13:08:61 [ 3.189814] random: udevd: uninitialized urandom read (16 bytes read) [ 3.194393] usbcore: registered new interface driver rtl8723du [ 3.211209] RTW: module init ret=0 [ 3.227131] usb 2-1.4.1: New USB device found, idVendor=0403, idProduct=6001, bcdDevice= 6.00 [ 3.235905] usb 2-1.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.242912] rtl8723du 1-1:1.2 ap0: renamed from wlan1 [ 3.243448] usb 2-1.4.1: Product: FT232R USB UART [ 3.253323] usb 2-1.4.1: Manufacturer: FTDI [ 3.257556] usb 2-1.4.1: SerialNumber: A10N54RA [ 3.275834] usbcore: registered new interface driver usbserial_generic [ 3.282736] usbserial: USB Serial support registered for generic [ 3.294966] usbcore: registered new interface driver ftdi_sio [ 3.300821] rtl8723du 1-1:1.2 wifi0: renamed from wlan0 [ 3.306331] usbserial: USB Serial support registered for FTDI USB Serial Device [ 3.314103] ftdi_sio 2-1.4.1:1.0: FTDI USB Serial Device converter detected [ 3.321495] usb 2-1.4.1: Detected FT232RL [ 3.327401] usb 2-1.4.1: FTDI USB Serial Device converter now attached to ttyUSB0 [ 3.432096] EXT4-fs (mmcblk1p3): re-mounted. Opts: (null) [ 3.459741] usb 2-1.4.3: new full-speed USB device number 5 using ehci-platform [ 3.729456] usb 2-1.4.3: New USB device found, idVendor=0403, idProduct=6015, bcdDevice=10.00 [ 3.738125] usb 2-1.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.745693] usb 2-1.4.3: Product: VE Direct cable [ 3.750424] usb 2-1.4.3: Manufacturer: VictronEnergy BV [ 3.755705] usb 2-1.4.3: SerialNumber: VE72YKGL [ 3.764726] ftdi_sio 2-1.4.3:1.0: FTDI USB Serial Device converter detected [ 3.772165] usb 2-1.4.3: Detected FT-X [ 3.777538] usb 2-1.4.3: FTDI USB Serial Device converter now attached to ttyUSB1 [ 3.989722] usb 2-1.4.4: new full-speed USB device number 6 using ehci-platform [ 4.176931] random: dd: uninitialized urandom read (512 bytes read) [ 4.247533] random: eeprom: uninitialized urandom read (24 bytes read) [ 4.259359] usb 2-1.4.4: New USB device found, idVendor=0403, idProduct=6015, bcdDevice=10.00 [ 4.268011] usb 2-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.275569] usb 2-1.4.4: Product: VE Direct cable [ 4.280332] usb 2-1.4.4: Manufacturer: VictronEnergy BV [ 4.285582] usb 2-1.4.4: SerialNumber: VE73U55L [ 4.294531] ftdi_sio 2-1.4.4:1.0: FTDI USB Serial Device converter detected [ 4.301919] usb 2-1.4.4: Detected FT-X [ 4.307552] usb 2-1.4.4: FTDI USB Serial Device converter now attached to ttyUSB2 Starting watchdog [ 4.898070] watchdog: watchdog0: watchdog did not stop! INIT: Entering runlevel: 5 Configuring network interfaces... done. [ 5.708923] random: dbus-uuidgen: uninitialized urandom read (12 bytes read) Starting system message bus: Setting up watches. Watches established. /var/run/dbus/ CREATE system_bus_socket Starting haveged: haveged: command socket is listening at fd 3 haveged: haveged starting up [ OK ] Starting bluetooth: bluetoothd. starting DNS forwarder and DHCP server: dnsmasq... done. starting DNS forwarder and DHCP server: dnsmasq.ap... done. [ 5.951781] NET: Registered protocol family 38 Starting syslogd/klogd: done * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon [ ok ] Starting php-fpm done Starting Connection Manager Starting Hiawatha Web Server: hiawatha. starting IPv4LL configuration daemon: avahi-autoipd... done. starting resolv.conf manager: resolv-watch... done. dbus-daemon[565]: [system] Activating service name='fi.w1.wpa_supplicant1' requested by ':1.2' (uid=0 pid=640 comm="connmand --nodnsproxy --nodaemon ") (using servicehelper) Starting crond: [ 6.626135] dwmac-sun8i 1c30000.ethernet eth0: PHY [0.1:01] driver [Generic PHY] (irq=POLL) OK [ 6.638547] dwmac-sun8i 1c30000.ethernet eth0: No Safety Features support found [ 6.646069] dwmac-sun8i 1c30000.ethernet eth0: No MAC Management Counters available [ 6.653810] dwmac-sun8i 1c30000.ethernet eth0: PTP not supported by HW [ 6.664135] dwmac-sun8i 1c30000.ethernet eth0: configuring for phy/mii link mode dbus-daemon[565]: [system] Successfully activated service 'fi.w1.wpa_supplicant1' Checking available software versions... Active rootfs: 2 Active version: 20230412212730 v2.94 [ 7.855487] random: crng init done [ 9.017211] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) Backup version: 20220715122339 v2.89 Last login: Mon May 15 06:42:27 +0000 2023 on /dev/ttyS0. root@nanopi:~# [ 11.575280] can: controller area network core [ 11.580067] NET: Registered protocol family 29 [ 11.775648] IPv6: ADDRCONF(NETDEV_CHANGE): can0: link becomes ready [ 12.362880] can: raw protocol [ 12.997630] RTW: port switch - port0(ap0), port1(wifi0) [ 13.553399] RTW: assoc success [ 13.556872] IPv6: ADDRCONF(NETDEV_CHANGE): ap0: link becomes ready [ 13.573844] RTW: set group key camid:0, addr:ba:4d:43:13:08:61, kid:1, type:TKIP [ 16.624546] NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!! [ 17.617594] NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!! [ 17.638370] NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!! [ 17.674033] NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!! [ 17.819092] NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!! [ 19.828596] NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!! [ 19.839068] NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!! [ 19.849715] NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!! [ 20.004548] NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!! [ 20.070868] NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!! [ 613.093907] RTW: set group key camid:0, addr:ba:4d:43:13:08:61, kid:2, type:TKIP [ 1213.104172] RTW: set group key camid:0, addr:ba:4d:43:13:08:61, kid:1, type:TKIP [ 1786.502907] mcp251xfd spi0.0 can0: CRC read error at address 0x0010 (length=4, data=00 90 56 87, CRC=0x9e87) retrying. [ 1813.110832] RTW: set group key camid:0, addr:ba:4d:43:13:08:61, kid:2, type:TKIP [ 2413.120237] RTW: set group key camid:0, addr:ba:4d:43:13:08:61, kid:1, type:TKIP [ 3013.129248] RTW: set group key camid:0, addr:ba:4d:43:13:08:61, kid:2, type:TKIP [ 3218.068120] mcp251xfd spi0.0 can0: CRC read error at address 0x0010 (length=4, data=00 98 76 dc, CRC=0xdffe) retrying. [ 3613.137713] RTW: set group key camid:0, addr:ba:4d:43:13:08:61, kid:1, type:TKIP [ 4213.140441] RTW: set group key camid:0, addr:ba:4d:43:13:08:61, kid:2, type:TKIP logout [ 4525.023464] RTW: clear wep or group key for addr:ba:4d:43:13:08:61, camid:0 [ 4525.033817] RTW: ERROR Free disconnecting network of scanned_queue failed due to pwlan == NULL [ 4525.033817]  U-Boot SPL 2018.05 (Jul 15 2022 - 12:24:20 +0000) DRAM: 512 MiB Trying to boot from MMC2 U-Boot 2018.05 (Jul 15 2022 - 12:24:20 +0000) Allwinner Technology CPU: Allwinner H3 (SUN8I 1680) Model: Victron Energy NanoPi Generic DRAM: 512 MiB MMC: SUNXI SD/MMC: 0, SUNXI SD/MMC: 1 Loading Environment from MMC... OK In: serial@01c28000 Out: serial@01c28000 Err: serial@01c28000 Net: phy interface0 eth0: ethernet@1c30000 Setting bus to 0 Hit any key to stop autoboot: 2  1  0 25479 bytes read in 4 ms (6.1 MiB/s) 3825672 bytes read in 185 ms (19.7 MiB/s) ## Flattened Device Tree blob at 43000000 Booting using the fdt blob at 0x43000000 Loading Device Tree to 49ff6000, end 49fff386 ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.109-venus-8 (oe-user@oe-host) (arm-ve-linux-gnueabi-gcc (GCC) 9.3.0, GNU ld (GNU Binutils) 2.34.0.20200220) #1 SMP Wed Apr 12 23:25:53 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: MultiPlus-II [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 64 MiB at 0x5bc00000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000040000000-0x000000005fffffff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000040000000-0x000000005fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000005fffffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: Using PSCI v0.1 Function IDs from DT [ 0.000000] percpu: Embedded 15 pages/cpu s31564 r8192 d21684 u61440 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130048 [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk1p3 rootwait ro rootfstype=ext4 5 vt.global_cursor_default=0 [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 443668K/524288K available (6144K kernel code, 647K rwdata, 1304K rodata, 1024K init, 221K bss, 15084K reserved, 65536K cma-reserved, 0K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] random: get_random_bytes called from start_kernel+0x314/0x4ac with crng_init=0 [ 0.000000] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000021] Switching to timer-based delay loop, resolution 41ns [ 0.000219] Console: colour dummy device 80x30 [ 0.000287] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.000309] pid_max: default: 32768 minimum: 301 [ 0.000458] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.000474] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.001168] CPU: Testing write buffer coherency: ok [ 0.001511] /cpus/cpu@0 missing clock-frequency property [ 0.001536] /cpus/cpu@1 missing clock-frequency property [ 0.001556] /cpus/cpu@2 missing clock-frequency property [ 0.001574] /cpus/cpu@3 missing clock-frequency property [ 0.001587] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.002178] Setting up static identity map for 0x40100000 - 0x40100060 [ 0.002304] rcu: Hierarchical SRCU implementation. [ 0.002939] smp: Bringing up secondary CPUs ... [ 0.013690] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.024514] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.035279] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.035375] smp: Brought up 1 node, 4 CPUs [ 0.035404] SMP: Total of 4 processors activated (192.00 BogoMIPS). [ 0.035412] CPU: All CPU(s) started in HYP mode. [ 0.035418] CPU: Virtualization extensions available. [ 0.036113] devtmpfs: initialized [ 0.041426] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.041616] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.041646] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.043931] pinctrl core: initialized pinctrl subsystem [ 0.045117] NET: Registered protocol family 16 [ 0.046571] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.047600] thermal_sys: Registered thermal governor 'step_wise' [ 0.047998] cpuidle: using governor menu [ 0.048205] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.048217] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.065834] cryptd: max_cpu_qlen set to 1000 [ 0.067052] vdd-sys-3v3: supplied by vdd-5v [ 0.067774] iommu: Default domain type: Translated [ 0.068022] usbcore: registered new interface driver usbfs [ 0.068069] usbcore: registered new interface driver hub [ 0.068115] usbcore: registered new device driver usb [ 0.069520] clocksource: Switched to clocksource arch_sys_counter [ 0.076795] NET: Registered protocol family 2 [ 0.076998] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.077698] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 0.077728] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) [ 0.077773] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.077838] TCP: Hash tables configured (established 4096 bind 4096) [ 0.077969] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.078020] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.078178] NET: Registered protocol family 1 [ 0.079417] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available [ 0.081170] Initialise system trusted keyrings [ 0.081356] workingset: timestamp_bits=30 max_order=17 bucket_order=0 [ 0.085452] Key type asymmetric registered [ 0.085474] Asymmetric key parser 'x509' registered [ 0.086212] sun4i-usb-phy 1c19400.phy: Couldn't request ID GPIO [ 0.089934] sun8i-h3-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 0.091810] sun8i-h3-r-pinctrl 1f02c00.pinctrl: initialized sunXi PIO driver [ 0.096752] Serial: 8250/16550 driver, 8 ports [ 0.117515] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 43, base_baud = 1500000) is a U6_16550A [ 0.700211] printk: console [ttyS0] enabled [ 0.725497] 1c28400.serial: ttyS1 at MMIO 0x1c28400 (irq = 44, base_baud = 1500000) is a U6_16550A [ 0.755377] 1c28800.serial: ttyS2 at MMIO 0x1c28800 (irq = 45, base_baud = 1500000) is a U6_16550A [ 0.785189] 1c28c00.serial: ttyS3 at MMIO 0x1c28c00 (irq = 46, base_baud = 1500000) is a U6_16550A [ 0.797637] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.804202] ehci-platform: EHCI generic platform driver [ 0.809894] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.816097] ohci-platform: OHCI generic platform driver [ 0.822404] i2c /dev entries driver [ 0.826451] i2c i2c-0: using pinctrl states for GPIO recovery [ 0.832301] i2c i2c-0: using generic GPIOs for recovery [ 0.838772] at24 0-0050: 256 byte 24c02 EEPROM, read-only [ 0.847546] rtc-pcf8523 0-0068: registered as rtc0 [ 0.853783] rtc-pcf8523 0-0068: setting system clock to 2023-05-15T09:16:34 UTC (1684142194) [ 0.862935] pca953x 0-0020: using no AI [ 0.871203] sunxi-wdt 1c20ca0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=1) [ 0.879649] watchdog: watchdog0 running and kernel based pre-userspace handler disabled [ 0.889622] sunxi-mmc 1c0f000.mmc: Got CD GPIO [ 0.891636] NET: Registered protocol family 10 [ 0.899436] Segment Routing with IPv6 [ 0.903217] NET: Registered protocol family 17 [ 0.907761] Registering SWP/SWPB emulation handler [ 0.914405] registered taskstats version 1 [ 0.914901] sunxi-mmc 1c11000.mmc: initialized, max. request size: 16384 KB [ 0.918519] Loading compiled-in X.509 certificates [ 0.919356] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB [ 0.947181] vdd-vcc-dram: supplied by vdd-sys-3v3 [ 0.994413] random: fast init done [ 0.997880] mmc1: new DDR MMC card at address 0001 [ 1.003650] mmcblk1: mmc1:0001 8GTF4R 7.28 GiB [ 1.008665] mmcblk1boot0: mmc1:0001 8GTF4R partition 1 4.00 MiB [ 1.015147] mmcblk1boot1: mmc1:0001 8GTF4R partition 2 4.00 MiB [ 1.022470] mmcblk1: p1 p2 p3 p4 < p5 > [ 1.160465] ehci-platform 1c1b000.usb: EHCI Host Controller [ 1.166365] ehci-platform 1c1b000.usb: new USB bus registered, assigned bus number 1 [ 1.174495] ehci-platform 1c1b000.usb: irq 34, io mem 0x01c1b000 [ 1.209531] ehci-platform 1c1b000.usb: USB 2.0 started, EHCI 1.00 [ 1.215850] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 1.224137] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.231364] usb usb1: Product: EHCI Host Controller [ 1.236239] usb usb1: Manufacturer: Linux 5.10.109-venus-8 ehci_hcd [ 1.242512] usb usb1: SerialNumber: 1c1b000.usb [ 1.247602] hub 1-0:1.0: USB hub found [ 1.251438] hub 1-0:1.0: 1 port detected [ 1.256226] ehci-platform 1c1d000.usb: EHCI Host Controller [ 1.262042] ehci-platform 1c1d000.usb: new USB bus registered, assigned bus number 2 [ 1.270046] ehci-platform 1c1d000.usb: irq 35, io mem 0x01c1d000 [ 1.299529] ehci-platform 1c1d000.usb: USB 2.0 started, EHCI 1.00 [ 1.305790] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 1.314067] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.321296] usb usb2: Product: EHCI Host Controller [ 1.326170] usb usb2: Manufacturer: Linux 5.10.109-venus-8 ehci_hcd [ 1.332446] usb usb2: SerialNumber: 1c1d000.usb [ 1.337468] hub 2-0:1.0: USB hub found [ 1.341278] hub 2-0:1.0: 1 port detected [ 1.345980] ohci-platform 1c1d400.usb: Generic Platform OHCI controller [ 1.352817] ohci-platform 1c1d400.usb: new USB bus registered, assigned bus number 3 [ 1.360775] ohci-platform 1c1d400.usb: irq 36, io mem 0x01c1d400 [ 1.433689] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10 [ 1.441975] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.449190] usb usb3: Product: Generic Platform OHCI controller [ 1.455118] usb usb3: Manufacturer: Linux 5.10.109-venus-8 ohci_hcd [ 1.461389] usb usb3: SerialNumber: 1c1d400.usb [ 1.466375] hub 3-0:1.0: USB hub found [ 1.470272] hub 3-0:1.0: 1 port detected [ 1.478995] input: disp_keys as /devices/platform/disp_keys/input/input0 [ 1.492569] EXT4-fs (mmcblk1p3): mounted filesystem with ordered data mode. Opts: (null) [ 1.500787] VFS: Mounted root (ext4 filesystem) readonly on device 179:3. [ 1.508075] devtmpfs: mounted [ 1.512475] Freeing unused kernel memory: 1024K [ 1.539538] usb 1-1: new high-speed USB device number 2 using ehci-platform [ 1.546734] Run /sbin/init as init process INIT: version 2.96 booting[ 1.629539] usb 2-1: new high-speed USB device number 2 using ehci-platform [ 1.740711] usb 1-1: New USB device found, idVendor=0bda, idProduct=d723, bcdDevice= 2.00 [ 1.748941] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.756210] usb 1-1: Product: 802.11n WLAN Adapter [ 1.761095] usb 1-1: Manufacturer: Realtek [ 1.765277] usb 1-1: SerialNumber: 00e04c000001 [ 1.794902] EXT4-fs (mmcblk1p5): mounted filesystem with ordered data mode. Opts: (null) [ 1.831506] usb 2-1: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice= 9.01 [ 1.839745] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.846919] usb 2-1: Product: USB2.0 Hub [ 1.851902] hub 2-1:1.0: USB hub found [ 1.856182] hub 2-1:1.0: 4 ports detected data partition is fine Starting udev [ 1.938836] udevd[134]: starting version 3.2.9 [ 1.954510] random: udevd: uninitialized urandom read (16 bytes read) [ 1.961573] random: udevd: uninitialized urandom read (16 bytes read) [ 1.968095] random: udevd: uninitialized urandom read (16 bytes read) [ 1.997272] udevd[135]: starting eudev-3.2.9 [ 2.138880] gxdisp_bl 0-0051: supply vcc not found, using dummy regulator [ 2.174524] CAN device driver interface [ 2.189772] usb 2-1.4: new high-speed USB device number 3 using ehci-platform [ 2.195674] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 2.213557] spi_master spi0: will run message pump with realtime priority [ 2.222418] lima 1c40000.gpu: gp - mali400 version major 1 minor 1 [ 2.223665] dwmac-sun8i 1c30000.ethernet: IRQ eth_wake_irq not found [ 2.228742] lima 1c40000.gpu: pp0 - mali400 version major 1 minor 1 [ 2.228833] lima 1c40000.gpu: pp1 - mali400 version major 1 minor 1 [ 2.234936] Bluetooth: Core ver 2.22 [ 2.235066] NET: Registered protocol family 31 [ 2.235071] Bluetooth: HCI device and connection manager initialized [ 2.235096] Bluetooth: HCI socket layer initialized [ 2.235108] Bluetooth: L2CAP socket layer initialized [ 2.235364] dwmac-sun8i 1c30000.ethernet: IRQ eth_lpi not found [ 2.241822] lima 1c40000.gpu: l2 cache 64K, 4-way, 64byte cache line, 64bit external bus [ 2.248405] dwmac-sun8i 1c30000.ethernet: No regulator found [ 2.255981] lima 1c40000.gpu: bus rate = 200000000 [ 2.256602] dwmac-sun8i 1c30000.ethernet: PTP uses main clock [ 2.262876] lima 1c40000.gpu: mod rate = 297000000 [ 2.267715] dwmac-sun8i 1c30000.ethernet: Current syscon value is not the default 148000 (expect 58000) [ 2.272818] lima 1c40000.gpu: dev_pm_opp_set_regulators: no regulator (mali) found: -19 [ 2.278999] dwmac-sun8i 1c30000.ethernet: No HW DMA feature register supported [ 2.279559] mcp251xfd spi0.0 can0: MCP2518FD rev0.0 (+RX_INT -MAB_NO_WARN +CRC_REG +CRC_RX +CRC_TX +ECC -HD c:40.00MHz m:20.00MHz r:17.00MHz e:16.66MHz) successfully initialized. [ 2.294375] lima 1c40000.gpu: Failed to register cooling device [ 2.297467] dwmac-sun8i 1c30000.ethernet: RX Checksum Offload Engine supported [ 2.304224] [drm] Initialized lima 1.1.0 20191231 for 1c40000.gpu on minor 0 [ 2.308141] dwmac-sun8i 1c30000.ethernet: COE Type 2 [ 2.323446] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 2.325801] dwmac-sun8i 1c30000.ethernet: TX Checksum insertion supported [ 2.327635] usbcore: registered new interface driver btusb [ 2.349015] Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000d lmp_ver=08 lmp_subver=8723 [ 2.350843] Bluetooth: hci0: RTL: rom_version status=0 version=2 [ 2.355102] dwmac-sun8i 1c30000.ethernet: Normal descriptors [ 2.362379] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723d_fw.bin [ 2.369450] dwmac-sun8i 1c30000.ethernet: Chain mode enabled [ 2.377644] usb 2-1.4: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11 [ 2.383588] dwmac-sun8i 1c30000.ethernet: Found internal PHY node [ 2.388008] usb 2-1.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.389435] 8723du: loading out-of-tree module taints kernel. [ 2.395278] dwmac-sun8i 1c30000.ethernet: Switch mux to internal PHY [ 2.401203] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723d_config.bin [ 2.402446] usb 2-1.4: Product: USB 2.0 Hub [ 2.402466] Bluetooth: hci0: RTL: cfg_sz 10, total sz 33266 [ 2.408454] dwmac-sun8i 1c30000.ethernet: Powering internal PHY [ 2.415978] hub 2-1.4:1.0: USB hub found [ 2.417648] RTW: module init start [ 2.417762] RTW: rtl8723du v5.13.4-17-ga6e5ee6.20210514_COEX20200103-3535 [ 2.417768] RTW: build time: Apr 12 2023 23:27:25 [ 2.417772] RTW: rtl8723du BT-Coex version = COEX20200103-3535 [ 2.506654] hub 2-1.4:1.0: 4 ports detected [ 2.723919] RTW: HW EFUSE [ 2.726637] RTW: 0x000: 29 81 00 7C 01 88 07 00 A0 04 EC 35 12 C0 A2 D8 [ 2.734081] RTW: 0x010: 24 28 28 29 24 24 26 2A 2A 2B 26 02 FF FF FF FF [ 2.741398] RTW: 0x020: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.748621] RTW: 0x030: FF FF FF FF FF FF FF FF FF FF 27 27 27 25 25 25 [ 2.755895] RTW: 0x040: 29 29 29 27 27 02 FF FF FF FF FF FF FF FF FF FF [ 2.757832] Bluetooth: hci0: RTL: fw version 0x828a96f1 [ 2.763081] RTW: 0x050: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.775458] RTW: 0x060: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.782576] RTW: 0x070: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.789694] RTW: 0x080: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.796797] RTW: 0x090: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.803911] RTW: 0x0A0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.811021] RTW: 0x0B0: FF FF FF FF FF FF FF FF 20 1B 1D 00 00 00 FF FF [ 2.818165] RTW: 0x0C0: FF 29 20 51 00 E6 00 FF 00 FF 11 FF FF FF FF FF [ 2.825375] RTW: 0x0D0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.832514] RTW: 0x0E0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.839635] RTW: 0x0F0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.846733] RTW: 0x100: DA 0B 23 D7 C7 46 07 B8 4D 43 13 08 61 09 03 52 [ 2.853845] RTW: 0x110: 65 61 6C 74 65 6B 16 03 38 30 32 2E 31 31 6E 20 [ 2.860957] RTW: 0x120: 57 4C 41 4E 20 41 64 61 70 74 65 72 00 FF FF FF [ 2.868054] RTW: 0x130: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.875161] RTW: 0x140: FF FF FF FF FF FF FF 0F FF FF FF FF FF FF FF FF [ 2.882265] RTW: 0x150: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.889361] RTW: 0x160: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.896468] RTW: 0x170: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.903573] RTW: 0x180: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.910687] RTW: 0x190: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.917783] RTW: 0x1A0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.924890] RTW: 0x1B0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.931995] RTW: 0x1C0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.939090] RTW: 0x1D0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.946196] RTW: 0x1E0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.949534] usb 2-1.4.1: new full-speed USB device number 4 using ehci-platform [ 2.953300] RTW: 0x1F0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.967858] RTW: hal_com_config_channel_plan chplan:0x20 [ 3.056889] RTW: [RF_PATH] ver_id.RF_TYPE:RF_1T1R [ 3.061732] RTW: [RF_PATH] HALSPEC's rf_reg_trx_path_bmp:0x11, rf_reg_path_avail_num:1, max_tx_cnt:1 [ 3.070881] RTW: [RF_PATH] PG's trx_path_bmp:0x00, max_tx_cnt:0 [ 3.076808] RTW: [RF_PATH] Registry's trx_path_bmp:0x00, tx_path_lmt:0, rx_path_lmt:0 [ 3.084675] RTW: [RF_PATH] HALDATA's trx_path_bmp:0x11, max_tx_cnt:1 [ 3.091031] RTW: [RF_PATH] HALDATA's rf_type:RF_1T1R, NumTotalRFPath:1 [ 3.097554] RTW: [TRX_Nss] HALSPEC - tx_nss:1, rx_nss:1 [ 3.102802] RTW: [TRX_Nss] Registry - tx_nss:0, rx_nss:0 [ 3.108109] RTW: [TRX_Nss] HALDATA - tx_nss:1, rx_nss:1 [ 3.113342] RTW: txpath=0x1, rxpath=0x1 [ 3.117185] RTW: txpath_1ss:0x1, num:1 [ 3.122394] RTW: rtw_regsty_chk_target_tx_power_valid return _FALSE for band:0, path:0, rs:0, t:-1 [ 3.135043] urandom_read: 2 callbacks suppressed [ 3.135062] random: udevd: uninitialized urandom read (16 bytes read) [ 3.137241] RTW: rtw_ndev_init(wlan0) if1 mac_addr=b8:4d:43:13:08:61 [ 3.140224] random: udevd: uninitialized urandom read (16 bytes read) [ 3.147663] RTW: rtw_ndev_init(wlan1) if2 mac_addr=ba:4d:43:13:08:61 [ 3.167533] usbcore: registered new interface driver rtl8723du [ 3.173452] RTW: module init ret=0 [ 3.204113] rtl8723du 1-1:1.2 ap0: renamed from wlan1 [ 3.217114] usb 2-1.4.1: New USB device found, idVendor=0403, idProduct=6001, bcdDevice= 6.00 [ 3.225705] usb 2-1.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.233199] usb 2-1.4.1: Product: FT232R USB UART [ 3.237911] usb 2-1.4.1: Manufacturer: FTDI [ 3.242113] usb 2-1.4.1: SerialNumber: A10N54RA [ 3.260790] rtl8723du 1-1:1.2 wifi0: renamed from wlan0 [ 3.260945] usbcore: registered new interface driver usbserial_generic [ 3.272956] usbserial: USB Serial support registered for generic [ 3.286573] usbcore: registered new interface driver ftdi_sio [ 3.292932] usbserial: USB Serial support registered for FTDI USB Serial Device [ 3.300716] ftdi_sio 2-1.4.1:1.0: FTDI USB Serial Device converter detected [ 3.307895] usb 2-1.4.1: Detected FT232RL [ 3.313048] usb 2-1.4.1: FTDI USB Serial Device converter now attached to ttyUSB0 [ 3.402393] EXT4-fs (mmcblk1p3): re-mounted. Opts: (null) [ 3.449637] usb 2-1.4.3: new full-speed USB device number 5 using ehci-platform [ 3.709560] usb 2-1.4.3: New USB device found, idVendor=0403, idProduct=6015, bcdDevice=10.00 [ 3.718159] usb 2-1.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.725773] usb 2-1.4.3: Product: VE Direct cable [ 3.730562] usb 2-1.4.3: Manufacturer: VictronEnergy BV [ 3.735826] usb 2-1.4.3: SerialNumber: VE72YKGL [ 3.745411] ftdi_sio 2-1.4.3:1.0: FTDI USB Serial Device converter detected [ 3.752850] usb 2-1.4.3: Detected FT-X [ 3.758314] usb 2-1.4.3: FTDI USB Serial Device converter now attached to ttyUSB1 [ 3.959705] usb 2-1.4.4: new full-speed USB device number 6 using ehci-platform [ 4.137716] random: dd: uninitialized urandom read (512 bytes read) [ 4.208681] random: eeprom: uninitialized urandom read (24 bytes read) [ 4.224876] usb 2-1.4.4: New USB device found, idVendor=0403, idProduct=6015, bcdDevice=10.00 [ 4.233522] usb 2-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.241090] usb 2-1.4.4: Product: VE Direct cable [ 4.245828] usb 2-1.4.4: Manufacturer: VictronEnergy BV [ 4.251130] usb 2-1.4.4: SerialNumber: VE73U55L [ 4.260003] ftdi_sio 2-1.4.4:1.0: FTDI USB Serial Device converter detected [ 4.267314] usb 2-1.4.4: Detected FT-X [ 4.272589] usb 2-1.4.4: FTDI USB Serial Device converter now attached to ttyUSB2 Starting watchdog [ 4.863189] watchdog: watchdog0: watchdog did not stop! INIT: Entering runlevel: 5 Configuring network interfaces... done. [ 5.668446] random: dbus-uuidgen: uninitialized urandom read (12 bytes read) Starting system message bus: Setting up watches. Watches established. /var/run/dbus/ CREATE system_bus_socket Starting haveged: haveged: command socket is listening at fd 3 haveged: haveged starting up [ OK ] Starting bluetooth: bluetoothd. starting DNS forwarder and DHCP server: dnsmasq... done. starting DNS forwarder and DHCP server: dnsmasq.ap... done. [ 5.905385] NET: Registered protocol family 38 Starting syslogd/klogd: done * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon [ ok ] Starting php-fpm done Starting Connection Manager Starting Hiawatha Web Server: hiawatha. starting IPv4LL configuration daemon: avahi-autoipd... done. starting resolv.conf manager: resolv-watch... done. dbus-daemon[564]: [system] Activating service name='fi.w1.wpa_supplicant1' requested by ':1.2' (uid=0 pid=639 comm="connmand --nodnsproxy --nodaemon ") (using servicehelper) Starting crond: [ 6.571565] dwmac-sun8i 1c30000.ethernet eth0: PHY [0.1:01] driver [Generic PHY] (irq=POLL) OK [ 6.583070] dwmac-sun8i 1c30000.ethernet eth0: No Safety Features support found [ 6.590534] dwmac-sun8i 1c30000.ethernet eth0: No MAC Management Counters available [ 6.598245] dwmac-sun8i 1c30000.ethernet eth0: PTP not supported by HW [ 6.612003] dwmac-sun8i 1c30000.ethernet eth0: configuring for phy/mii link mode dbus-daemon[564]: [system] Successfully activated service 'fi.w1.wpa_supplicant1' Checking available software versions... Active rootfs: 2 Active version: 20230412212730 v2.94 [ 7.990056] random: crng init done [ 9.208772] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) Backup version: 20220715122339 v2.89 Last login: Mon May 15 07:59:35 +0000 2023 on /dev/ttyS0. root@nanopi:~# [ 11.910147] can: controller area network core [ 11.914794] NET: Registered protocol family 29 [ 12.003278] IPv6: ADDRCONF(NETDEV_CHANGE): can0: link becomes ready [ 12.600639] can: raw protocol [ 13.008113] RTW: port switch - port0(ap0), port1(wifi0) [ 13.624103] RTW: assoc success [ 13.627456] IPv6: ADDRCONF(NETDEV_CHANGE): ap0: link becomes ready [ 13.649940] RTW: set group key camid:0, addr:ba:4d:43:13:08:61, kid:1, type:TKIP [ 15.460337] NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!! [ 15.477436] NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!! [ 15.490425] NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!! [ 15.503378] NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!! [ 15.706542] NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!! [ 17.804139] NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!! [ 18.098347] NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!! [ 18.147104] NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!! [ 18.156700] NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!! [ 18.171473] NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!! [ 613.126976] RTW: set group key camid:0, addr:ba:4d:43:13:08:61, kid:2, type:TKIP [ 1213.129274] RTW: set group key camid:0, addr:ba:4d:43:13:08:61, kid:1, type:TKIP [ 1813.138934] RTW: set group key camid:0, addr:ba:4d:43:13:08:61, kid:2, type:TKIP [ 2413.148163] RTW: set group key camid:0, addr:ba:4d:43:13:08:61, kid:1, type:TKIP [ 3013.156991] RTW: set group key camid:0, addr:ba:4d:43:13:08:61, kid:2, type:TKIP [ 3613.159301] RTW: set group key camid:0, addr:ba:4d:43:13:08:61, kid:1, type:TKIP [ 4213.167227] RTW: set group key camid:0, addr:ba:4d:43:13:08:61, kid:2, type:TKIP haveged: haveged: Stopping due to signal 15 logout [ 4519.527108] RTW: clear wep or group key for addr:ba:4d:43:13:08:61, camid:0 [ 4519.540325] RTW: ERROR Free disconnecting network of scanned_queue failed due to pwlan == NULL [ 4519.540325] Üà„  U-Boot SPL 2018.05 (Jul 15 2022 - 12:24:20 +0000) DRAM: 512 MiB Trying to boot from MMC2 U-Boot 2018.05 (Jul 15 2022 - 12:24:20 +0000) Allwinner Technology CPU: Allwinner H3 (SUN8I 1680) Model: Victron Energy NanoPi Generic DRAM: 512 MiB MMC: SUNXI SD/MMC: 0, SUNXI SD/MMC: 1 Loading Environment from MMC... OK In: serial@01c28000 Out: serial@01c28000 Err: serial@01c28000 Net: phy interface0 eth0: ethernet@1c30000 Setting bus to 0 Hit any key to stop autoboot: 2  1  0 25479 bytes read in 4 ms (6.1 MiB/s) 3825672 bytes read in 184 ms (19.8 MiB/s) ## Flattened Device Tree blob at 43000000 Booting using the fdt blob at 0x43000000 Loading Device Tree to 49ff6000, end 49fff386 ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.109-venus-8 (oe-user@oe-host) (arm-ve-linux-gnueabi-gcc (GCC) 9.3.0, GNU ld (GNU Binutils) 2.34.0.20200220) #1 SMP Wed Apr 12 23:25:53 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: MultiPlus-II [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 64 MiB at 0x5bc00000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000040000000-0x000000005fffffff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000040000000-0x000000005fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000005fffffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: Using PSCI v0.1 Function IDs from DT [ 0.000000] percpu: Embedded 15 pages/cpu s31564 r8192 d21684 u61440 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130048 [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk1p3 rootwait ro rootfstype=ext4 5 vt.global_cursor_default=0 [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 443668K/524288K available (6144K kernel code, 647K rwdata, 1304K rodata, 1024K init, 221K bss, 15084K reserved, 65536K cma-reserved, 0K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] random: get_random_bytes called from start_kernel+0x314/0x4ac with crng_init=0 [ 0.000000] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000021] Switching to timer-based delay loop, resolution 41ns [ 0.000218] Console: colour dummy device 80x30 [ 0.000285] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.000309] pid_max: default: 32768 minimum: 301 [ 0.000460] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.000478] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.001181] CPU: Testing write buffer coherency: ok [ 0.001525] /cpus/cpu@0 missing clock-frequency property [ 0.001552] /cpus/cpu@1 missing clock-frequency property [ 0.001572] /cpus/cpu@2 missing clock-frequency property [ 0.001591] /cpus/cpu@3 missing clock-frequency property [ 0.001604] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.002194] Setting up static identity map for 0x40100000 - 0x40100060 [ 0.002323] rcu: Hierarchical SRCU implementation. [ 0.002960] smp: Bringing up secondary CPUs ... [ 0.013720] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.024539] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.035300] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.035399] smp: Brought up 1 node, 4 CPUs [ 0.035428] SMP: Total of 4 processors activated (192.00 BogoMIPS). [ 0.035436] CPU: All CPU(s) started in HYP mode. [ 0.035443] CPU: Virtualization extensions available. [ 0.036146] devtmpfs: initialized [ 0.041478] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.041670] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.041701] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.043980] pinctrl core: initialized pinctrl subsystem [ 0.045166] NET: Registered protocol family 16 [ 0.046642] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.047675] thermal_sys: Registered thermal governor 'step_wise' [ 0.048076] cpuidle: using governor menu [ 0.048285] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.048298] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.065938] cryptd: max_cpu_qlen set to 1000 [ 0.067184] vdd-sys-3v3: supplied by vdd-5v [ 0.067909] iommu: Default domain type: Translated [ 0.068163] usbcore: registered new interface driver usbfs [ 0.068212] usbcore: registered new interface driver hub [ 0.068260] usbcore: registered new device driver usb [ 0.069693] clocksource: Switched to clocksource arch_sys_counter [ 0.076967] NET: Registered protocol family 2 [ 0.077155] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.077871] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 0.077904] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) [ 0.077950] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.078015] TCP: Hash tables configured (established 4096 bind 4096) [ 0.078144] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.078192] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.078350] NET: Registered protocol family 1 [ 0.079609] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available [ 0.081412] Initialise system trusted keyrings [ 0.081611] workingset: timestamp_bits=30 max_order=17 bucket_order=0 [ 0.085663] Key type asymmetric registered [ 0.085684] Asymmetric key parser 'x509' registered [ 0.086432] sun4i-usb-phy 1c19400.phy: Couldn't request ID GPIO [ 0.090148] sun8i-h3-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 0.092099] sun8i-h3-r-pinctrl 1f02c00.pinctrl: initialized sunXi PIO driver [ 0.097072] Serial: 8250/16550 driver, 8 ports [ 0.117778] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 43, base_baud = 1500000) is a U6_16550A [ 0.700639] printk: console [ttyS0] enabled [ 0.725871] 1c28400.serial: ttyS1 at MMIO 0x1c28400 (irq = 44, base_baud = 1500000) is a U6_16550A [ 0.755709] 1c28800.serial: ttyS2 at MMIO 0x1c28800 (irq = 45, base_baud = 1500000) is a U6_16550A [ 0.785579] 1c28c00.serial: ttyS3 at MMIO 0x1c28c00 (irq = 46, base_baud = 1500000) is a U6_16550A [ 0.798090] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.804655] ehci-platform: EHCI generic platform driver [ 0.810321] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.816518] ohci-platform: OHCI generic platform driver [ 0.822843] i2c /dev entries driver [ 0.826883] i2c i2c-0: using pinctrl states for GPIO recovery [ 0.832729] i2c i2c-0: using generic GPIOs for recovery [ 0.839179] at24 0-0050: 256 byte 24c02 EEPROM, read-only [ 0.847973] rtc-pcf8523 0-0068: registered as rtc0 [ 0.854214] rtc-pcf8523 0-0068: setting system clock to 2023-05-15T10:33:42 UTC (1684146822) [ 0.863316] pca953x 0-0020: using no AI [ 0.871136] sunxi-wdt 1c20ca0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=1) [ 0.879518] watchdog: watchdog0 running and kernel based pre-userspace handler disabled [ 0.889465] sunxi-mmc 1c0f000.mmc: Got CD GPIO [ 0.891544] NET: Registered protocol family 10 [ 0.899296] Segment Routing with IPv6 [ 0.903069] NET: Registered protocol family 17 [ 0.907615] Registering SWP/SWPB emulation handler [ 0.912328] sunxi-mmc 1c11000.mmc: initialized, max. request size: 16384 KB [ 0.914272] registered taskstats version 1 [ 0.919297] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB [ 0.930463] Loading compiled-in X.509 certificates [ 0.945184] vdd-vcc-dram: supplied by vdd-sys-3v3 [ 0.990892] mmc1: new DDR MMC card at address 0001 [ 0.996612] mmcblk1: mmc1:0001 8GTF4R 7.28 GiB [ 1.001798] mmcblk1boot0: mmc1:0001 8GTF4R partition 1 4.00 MiB [ 1.008294] mmcblk1boot1: mmc1:0001 8GTF4R partition 2 4.00 MiB [ 1.015835] mmcblk1: p1 p2 p3 p4 < p5 > [ 1.020079] random: fast init done [ 1.170605] ehci-platform 1c1b000.usb: EHCI Host Controller [ 1.176503] ehci-platform 1c1b000.usb: new USB bus registered, assigned bus number 1 [ 1.184673] ehci-platform 1c1b000.usb: irq 34, io mem 0x01c1b000 [ 1.219705] ehci-platform 1c1b000.usb: USB 2.0 started, EHCI 1.00 [ 1.226020] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 1.234309] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.241537] usb usb1: Product: EHCI Host Controller [ 1.246413] usb usb1: Manufacturer: Linux 5.10.109-venus-8 ehci_hcd [ 1.252685] usb usb1: SerialNumber: 1c1b000.usb [ 1.257760] hub 1-0:1.0: USB hub found [ 1.261571] hub 1-0:1.0: 1 port detected [ 1.266352] ehci-platform 1c1d000.usb: EHCI Host Controller [ 1.272157] ehci-platform 1c1d000.usb: new USB bus registered, assigned bus number 2 [ 1.280137] ehci-platform 1c1d000.usb: irq 35, io mem 0x01c1d000 [ 1.309705] ehci-platform 1c1d000.usb: USB 2.0 started, EHCI 1.00 [ 1.315990] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 1.324268] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.331497] usb usb2: Product: EHCI Host Controller [ 1.336371] usb usb2: Manufacturer: Linux 5.10.109-venus-8 ehci_hcd [ 1.342647] usb usb2: SerialNumber: 1c1d000.usb [ 1.347631] hub 2-0:1.0: USB hub found [ 1.351457] hub 2-0:1.0: 1 port detected [ 1.356147] ohci-platform 1c1d400.usb: Generic Platform OHCI controller [ 1.362979] ohci-platform 1c1d400.usb: new USB bus registered, assigned bus number 3 [ 1.370923] ohci-platform 1c1d400.usb: irq 36, io mem 0x01c1d400 [ 1.443857] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10 [ 1.452144] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.459359] usb usb3: Product: Generic Platform OHCI controller [ 1.465287] usb usb3: Manufacturer: Linux 5.10.109-venus-8 ohci_hcd [ 1.471557] usb usb3: SerialNumber: 1c1d400.usb [ 1.476540] hub 3-0:1.0: USB hub found [ 1.480445] hub 3-0:1.0: 1 port detected [ 1.489188] input: disp_keys as /devices/platform/disp_keys/input/input0 [ 1.502605] EXT4-fs (mmcblk1p3): mounted filesystem with ordered data mode. Opts: (null) [ 1.510823] VFS: Mounted root (ext4 filesystem) readonly on device 179:3. [ 1.518113] devtmpfs: mounted [ 1.522513] Freeing unused kernel memory: 1024K [ 1.549706] usb 1-1: new high-speed USB device number 2 using ehci-platform [ 1.589855] Run /sbin/init as init process INIT: [ 1.639721] usb 2-1: new high-speed USB device number 2 using ehci-platform version 2.96 booting [ 1.750907] usb 1-1: New USB device found, idVendor=0bda, idProduct=d723, bcdDevice= 2.00 [ 1.759128] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.766350] usb 1-1: Product: 802.11n WLAN Adapter [ 1.771210] usb 1-1: Manufacturer: Realtek [ 1.775344] usb 1-1: SerialNumber: 00e04c000001 [ 1.841627] usb 2-1: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice= 9.01 [ 1.849891] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.857050] usb 2-1: Product: USB2.0 Hub [ 1.861342] EXT4-fs (mmcblk1p5): mounted filesystem with ordered data mode. Opts: (null) [ 1.861954] hub 2-1:1.0: USB hub found [ 1.873765] hub 2-1:1.0: 4 ports detected data partition is fine Starting udev [ 1.997105] udevd[134]: starting version 3.2.9 [ 2.012961] random: udevd: uninitialized urandom read (16 bytes read) [ 2.019986] random: udevd: uninitialized urandom read (16 bytes read) [ 2.026514] random: udevd: uninitialized urandom read (16 bytes read) [ 2.055569] udevd[135]: starting eudev-3.2.9 [ 2.193809] gxdisp_bl 0-0051: supply vcc not found, using dummy regulator [ 2.209845] usb 2-1.4: new high-speed USB device number 3 using ehci-platform [ 2.225371] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 2.250510] Bluetooth: Core ver 2.22 [ 2.252604] CAN device driver interface [ 2.254221] NET: Registered protocol family 31 [ 2.262526] Bluetooth: HCI device and connection manager initialized [ 2.268965] Bluetooth: HCI socket layer initialized [ 2.272198] spi_master spi0: will run message pump with realtime priority [ 2.273963] Bluetooth: L2CAP socket layer initialized [ 2.282450] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 2.288532] lima 1c40000.gpu: gp - mali400 version major 1 minor 1 [ 2.290547] dwmac-sun8i 1c30000.ethernet: IRQ eth_wake_irq not found [ 2.290559] dwmac-sun8i 1c30000.ethernet: IRQ eth_lpi not found [ 2.290649] dwmac-sun8i 1c30000.ethernet: No regulator found [ 2.290758] dwmac-sun8i 1c30000.ethernet: PTP uses main clock [ 2.290789] dwmac-sun8i 1c30000.ethernet: Current syscon value is not the default 148000 (expect 58000) [ 2.293239] dwmac-sun8i 1c30000.ethernet: No HW DMA feature register supported [ 2.298756] lima 1c40000.gpu: pp0 - mali400 version major 1 minor 1 [ 2.305078] dwmac-sun8i 1c30000.ethernet: RX Checksum Offload Engine supported [ 2.311102] lima 1c40000.gpu: pp1 - mali400 version major 1 minor 1 [ 2.316639] dwmac-sun8i 1c30000.ethernet: COE Type 2 [ 2.322498] lima 1c40000.gpu: l2 cache 64K, 4-way, 64byte cache line, 64bit external bus [ 2.331796] dwmac-sun8i 1c30000.ethernet: TX Checksum insertion supported [ 2.331809] dwmac-sun8i 1c30000.ethernet: Normal descriptors [ 2.339856] lima 1c40000.gpu: bus rate = 200000000 [ 2.345376] dwmac-sun8i 1c30000.ethernet: Chain mode enabled [ 2.348090] mcp251xfd spi0.0 can0: MCP2518FD rev0.0 (+RX_INT -MAB_NO_WARN +CRC_REG +CRC_RX +CRC_TX +ECC -HD c:40.00MHz m:20.00MHz r:17.00MHz e:16.66MHz) successfully initialized. [ 2.352656] lima 1c40000.gpu: mod rate = 297000000 [ 2.415717] lima 1c40000.gpu: dev_pm_opp_set_regulators: no regulator (mali) found: -19 [ 2.428969] dwmac-sun8i 1c30000.ethernet: Found internal PHY node [ 2.437257] dwmac-sun8i 1c30000.ethernet: Switch mux to internal PHY [ 2.438160] 8723du: loading out-of-tree module taints kernel. [ 2.443891] dwmac-sun8i 1c30000.ethernet: Powering internal PHY [ 2.453372] usbcore: registered new interface driver btusb [ 2.458699] Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000d lmp_ver=08 lmp_subver=8723 [ 2.472285] Bluetooth: hci0: RTL: rom_version status=0 version=2 [ 2.472303] lima 1c40000.gpu: Failed to register cooling device [ 2.477206] [drm] Initialized lima 1.1.0 20191231 for 1c40000.gpu on minor 0 [ 2.478408] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723d_fw.bin [ 2.484349] usb 2-1.4: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11 [ 2.484365] usb 2-1.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.484373] usb 2-1.4: Product: USB 2.0 Hub [ 2.494043] hub 2-1.4:1.0: USB hub found [ 2.514118] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723d_config.bin [ 2.525197] RTW: module init start [ 2.529302] Bluetooth: hci0: RTL: cfg_sz 10, total sz 33266 [ 2.531652] RTW: rtl8723du v5.13.4-17-ga6e5ee6.20210514_COEX20200103-3535 [ 2.531664] RTW: build time: Apr 12 2023 23:27:25 [ 2.531669] RTW: rtl8723du BT-Coex version = COEX20200103-3535 [ 2.534799] hub 2-1.4:1.0: 4 ports detected [ 2.755722] RTW: HW EFUSE [ 2.758456] RTW: 0x000: 29 81 00 7C 01 88 07 00 A0 04 EC 35 12 C0 A2 D8 [ 2.765908] RTW: 0x010: 24 28 28 29 24 24 26 2A 2A 2B 26 02 FF FF FF FF [ 2.773302] RTW: 0x020: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.780663] RTW: 0x030: FF FF FF FF FF FF FF FF FF FF 27 27 27 25 25 25 [ 2.787865] RTW: 0x040: 29 29 29 27 27 02 FF FF FF FF FF FF FF FF FF FF [ 2.795231] RTW: 0x050: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.802582] RTW: 0x060: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.809803] RTW: 0x070: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.817327] Bluetooth: hci0: RTL: fw version 0x828a96f1 [ 2.822633] RTW: 0x080: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.829785] RTW: 0x090: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.836920] RTW: 0x0A0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.844067] RTW: 0x0B0: FF FF FF FF FF FF FF FF 20 1B 1D 00 00 00 FF FF [ 2.851219] RTW: 0x0C0: FF 29 20 51 00 E6 00 FF 00 FF 11 FF FF FF FF FF [ 2.858389] RTW: 0x0D0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.865551] RTW: 0x0E0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.872711] RTW: 0x0F0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.879879] RTW: 0x100: DA 0B 23 D7 C7 46 07 B8 4D 43 13 08 61 09 03 52 [ 2.887026] RTW: 0x110: 65 61 6C 74 65 6B 16 03 38 30 32 2E 31 31 6E 20 [ 2.894185] RTW: 0x120: 57 4C 41 4E 20 41 64 61 70 74 65 72 00 FF FF FF [ 2.901321] RTW: 0x130: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.908448] RTW: 0x140: FF FF FF FF FF FF FF 0F FF FF FF FF FF FF FF FF [ 2.915579] RTW: 0x150: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.922721] RTW: 0x160: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.929855] RTW: 0x170: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.936978] RTW: 0x180: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.944109] RTW: 0x190: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.951241] RTW: 0x1A0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.958363] RTW: 0x1B0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.965493] RTW: 0x1C0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.972628] RTW: 0x1D0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.979884] RTW: 0x1E0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.987143] RTW: 0x1F0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 2.994510] RTW: hal_com_config_channel_plan chplan:0x20 [ 3.029785] usb 2-1.4.1: new full-speed USB device number 4 using ehci-platform [ 3.081033] RTW: [RF_PATH] ver_id.RF_TYPE:RF_1T1R [ 3.085765] RTW: [RF_PATH] HALSPEC's rf_reg_trx_path_bmp:0x11, rf_reg_path_avail_num:1, max_tx_cnt:1 [ 3.094922] RTW: [RF_PATH] PG's trx_path_bmp:0x00, max_tx_cnt:0 [ 3.100871] RTW: [RF_PATH] Registry's trx_path_bmp:0x00, tx_path_lmt:0, rx_path_lmt:0 [ 3.108695] RTW: [RF_PATH] HALDATA's trx_path_bmp:0x11, max_tx_cnt:1 [ 3.115060] RTW: [RF_PATH] HALDATA's rf_type:RF_1T1R, NumTotalRFPath:1 [ 3.121609] RTW: [TRX_Nss] HALSPEC - tx_nss:1, rx_nss:1 [ 3.126838] RTW: [TRX_Nss] Registry - tx_nss:0, rx_nss:0 [ 3.132161] RTW: [TRX_Nss] HALDATA - tx_nss:1, rx_nss:1 [ 3.137397] RTW: txpath=0x1, rxpath=0x1 [ 3.141249] RTW: txpath_1ss:0x1, num:1 [ 3.146284] RTW: rtw_regsty_chk_target_tx_power_valid return _FALSE for band:0, path:0, rs:0, t:-1 [ 3.157631] RTW: rtw_ndev_init(wlan0) if1 mac_addr=b8:4d:43:13:08:61 [ 3.160019] urandom_read: 2 callbacks suppressed [ 3.160032] random: udevd: uninitialized urandom read (16 bytes read) [ 3.165561] RTW: rtw_ndev_init(wlan1) if2 mac_addr=ba:4d:43:13:08:61 [ 3.169009] random: udevd: uninitialized urandom read (16 bytes read) [ 3.176469] usbcore: registered new interface driver rtl8723du [ 3.194019] RTW: module init ret=0 [ 3.232707] rtl8723du 1-1:1.2 ap0: renamed from wlan1 [ 3.286704] usb 2-1.4.1: New USB device found, idVendor=0403, idProduct=6001, bcdDevice= 6.00 [ 3.290806] rtl8723du 1-1:1.2 wifi0: renamed from wlan0 [ 3.295443] usb 2-1.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.308084] usb 2-1.4.1: Product: FT232R USB UART [ 3.312910] usb 2-1.4.1: Manufacturer: FTDI [ 3.317133] usb 2-1.4.1: SerialNumber: A10N54RA [ 3.339031] usbcore: registered new interface driver usbserial_generic [ 3.345944] usbserial: USB Serial support registered for generic [ 3.358950] usbcore: registered new interface driver ftdi_sio [ 3.365051] usbserial: USB Serial support registered for FTDI USB Serial Device [ 3.372764] ftdi_sio 2-1.4.1:1.0: FTDI USB Serial Device converter detected [ 3.379920] usb 2-1.4.1: Detected FT232RL [ 3.385131] usb 2-1.4.1: FTDI USB Serial Device converter now attached to ttyUSB0 [ 3.454463] EXT4-fs (mmcblk1p3): re-mounted. Opts: (null) [ 3.519806] usb 2-1.4.3: new full-speed USB device number 5 using ehci-platform [ 3.779659] usb 2-1.4.3: New USB device found, idVendor=0403, idProduct=6015, bcdDevice=10.00 [ 3.788340] usb 2-1.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.795896] usb 2-1.4.3: Product: VE Direct cable [ 3.800681] usb 2-1.4.3: Manufacturer: VictronEnergy BV [ 3.805961] usb 2-1.4.3: SerialNumber: VE72YKGL [ 3.815227] ftdi_sio 2-1.4.3:1.0: FTDI USB Serial Device converter detected [ 3.822623] usb 2-1.4.3: Detected FT-X [ 3.828241] usb 2-1.4.3: FTDI USB Serial Device converter now attached to ttyUSB1 [ 4.039815] usb 2-1.4.4: new full-speed USB device number 6 using ehci-platform [ 4.195494] random: dd: uninitialized urandom read (512 bytes read) [ 4.265947] random: eeprom: uninitialized urandom read (24 bytes read) [ 4.299610] usb 2-1.4.4: New USB device found, idVendor=0403, idProduct=6015, bcdDevice=10.00 [ 4.308267] usb 2-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.315851] usb 2-1.4.4: Product: VE Direct cable [ 4.320617] usb 2-1.4.4: Manufacturer: VictronEnergy BV [ 4.325883] usb 2-1.4.4: SerialNumber: VE73U55L [ 4.334205] ftdi_sio 2-1.4.4:1.0: FTDI USB Serial Device converter detected [ 4.341532] usb 2-1.4.4: Detected FT-X [ 4.346757] usb 2-1.4.4: FTDI USB Serial Device converter now attached to ttyUSB2 Starting watchdog [ 4.917197] watchdog: watchdog0: watchdog did not stop! INIT: Entering runlevel: 5 Configuring network interfaces... done. [ 5.728509] random: dbus-uuidgen: uninitialized urandom read (12 bytes read) Starting system message bus: Setting up watches. Watches established. /var/run/dbus/ CREATE system_bus_socket Starting haveged: haveged: command socket is listening at fd 3 haveged: haveged starting up [ OK ] Starting bluetooth: bluetoothd. starting DNS forwarder and DHCP server: dnsmasq... done. starting DNS forwarder and DHCP server: dnsmasq.ap... done. [ 5.961395] NET: Registered protocol family 38 Starting syslogd/klogd: done * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon [ ok ] Starting php-fpm done Starting Connection Manager Starting Hiawatha Web Server: hiawatha. starting IPv4LL configuration daemon: avahi-autoipd... done. starting resolv.conf manager: resolv-watch... done. Starting crond: dbus-daemon[564]: [system] Activating service name='fi.w1.wpa_supplicant1' requested by ':1.2' (uid=0 pid=639 comm="connmand --nodnsproxy --nodaemon ") (using servicehelper) OK [ 6.634780] dwmac-sun8i 1c30000.ethernet eth0: PHY [0.1:01] driver [Generic PHY] (irq=POLL) [ 6.647081] dwmac-sun8i 1c30000.ethernet eth0: No Safety Features support found [ 6.654608] dwmac-sun8i 1c30000.ethernet eth0: No MAC Management Counters available [ 6.662356] dwmac-sun8i 1c30000.ethernet eth0: PTP not supported by HW [ 6.674881] dwmac-sun8i 1c30000.ethernet eth0: configuring for phy/mii link mode dbus-daemon[564]: [system] Successfully activated service 'fi.w1.wpa_supplicant1' Checking available software versions... Active rootfs: 2 Active version: 20230412212730 v2.94 [ 7.658186] random: crng init done [ 9.101484] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) Backup version: 20220715122339 v2.89 Last login: Mon May 15 09:16:43 +0000 2023 on /dev/ttyS0. root@nanopi:~# [ 11.706664] can: controller area network core [ 11.711522] NET: Registered protocol family 29 [ 11.830317] IPv6: ADDRCONF(NETDEV_CHANGE): can0: link becomes ready [ 12.305688] can: raw protocol [ 12.974562] RTW: port switch - port0(ap0), port1(wifi0) [ 13.627851] RTW: assoc success [ 13.631433] IPv6: ADDRCONF(NETDEV_CHANGE): ap0: link becomes ready [ 13.669621] RTW: set group key camid:0, addr:ba:4d:43:13:08:61, kid:1, type:TKIP [ 16.435094] NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!! [ 17.484055] NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!! [ 17.628051] NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!! [ 17.688834] NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!! [ 17.697505] NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!! [ 17.711371] NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!! [ 17.719560] NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!! [ 17.727896] NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!! [ 17.788371] NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!! [ 17.810686] NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!! [ 39.460150] RTW: ============ STA [00:1f:3b:70:36:19] =================== [ 39.467132] RTW: mac_id : 2 [ 39.470052] RTW: wireless_mode : 0x03 [ 39.473726] RTW: mimo_type : 0 [ 39.476790] RTW: static smps : N [ 39.480060] RTW: bw_mode : 20MHz, ra_bw_mode : 20MHz [ 39.485040] RTW: rate_id : 6 [ 39.487937] RTW: rssi : 59 (%), rssi_level : 0 [ 39.492428] RTW: is_support_sgi : N, is_vht_enable : N [ 39.497619] RTW: disable_ra : N, disable_pt : N [ 39.502209] RTW: is_noisy : N [ 39.505206] RTW: txrx_state : 0 [ 39.508361] RTW: curr_tx_rate : CCK_1M (L) [ 39.512545] RTW: curr_tx_bw : 20MHz [ 39.516057] RTW: curr_retry_ratio : 0 [ 39.519771] RTW: ra_mask : 0x0000000000000fff [ 39.519771] [ 39.528846] RTW: set group key camid:0, addr:ba:4d:43:13:08:61, kid:1, type:TKIP [ 39.529325] RTW: send eapol packet 1/4 [ 39.543229] RTW: recv eapol packet 2/4 [ 39.548619] RTW: send eapol packet 3/4 [ 39.555626] RTW: recv eapol packet 4/4 [ 39.560375] RTW: set pairwise key camid:1, addr:00:1f:3b:70:36:19, kid:0, type:TKIP