U-Boot SPL 2018.05 (Apr 16 2022 - 08:59:36 +0000) DRAM: 1024 MiB CPU: 912000000Hz, AXI/AHB/APB: 3/2/2 Trying to boot from MMC2 U-Boot 2018.05 (Apr 16 2022 - 08:59:36 +000) Allwinner Technology CPU: Allwinner A20 (SUN7I) Model: CubZYYH+H(Jready DRAM: 1 GiB MMC: SUNXI SD/MMC: 0, SUNXI SD/MMC: 1 Loading Environment from MMC... OK In: serial@01c28000 Out: serial@01c28000 Err: serial@01c28000 Net: No ethernet found. Setting bus to 1 Hit any key to stop autoboot: 0 30742 bytes read in 6 ms (4.9 MiB/s) 3805392 bytes read in 218 ms (16.6 MiB/s) ## Flattened Device Tree blob at 43000000 Booting using the fdt blob at 0x43000000 Loading Device Tree to 49fg5000, end 69fff815 ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 ۂj[ 0.000000] 6HX,RɥBzɑbͱbR+$Hؐ.000000] mem auto-init: stack:off, heap |[kzBAɕ5{[ 0.000000] Memory: 930756K/1048576K available (6144K kern V>W> {& W> {& {+ZʪZەZa-reserved, 262Lߚ)lZZ+H[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=3, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0?000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adj].WV֫/lKۍ}out_leaf=16, nr_,]j+lHؐ.000000] NR_IRQS: 16, nr_ir\.'L >W-.'LSH+lHؐ.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] random: get_random_bytes caled from start_kernel+0x314/0x4bc with crng_init=0 [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000007] sched_clkKсۢj!鱃ͽъrͱɅٕʺr5{rݥэɵqͽr5{rͽe: ~imer: [X-'lLffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.000805] clocksource: hstimer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370868154 ns [ 0.081077] Console: յ偳٥ce 80x30 [ 0.001149] Calibrating delay loop (skipped), value calculated using timer frequr5%AMbiJj+lHؐ.001172] pid_max: default: 32768 minimum: 301C[ 0.001317] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.001336] Mountp+ˋ剱ies: 2048 (order: 1, 8192 bytes, linear) [ 0.002071] CPU: Testin-WV? Wz5{rͽCjɕɽperty [ 0.002463] /cpus/cpu@1 missing ,kWVWU5{rAUɕbbсbjeɁもjrߕAѥѥAɁjÊj+$Hؐ.003301] rcu: Hierarchical SRCU implementation. [ 0.004039] smp: Bringig up secondary CPUs ... [ 0.014816] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.014977] smp: Brought up 1 node, 2 CPUs +dHؐ.014998] SMP: Total of 2 processors activated (96.00 Bo֫* 5rjrAU AUߥх﹁ceR+lHؐ.015015] CPU: Virtualization extensions available. [ 0.015760] devtmpfs: initialized [ 0.02231AJmplY[YɁ ɍѕɕ߂ɥсفjrͽRj郂}危ffffff, max_idle_ns: 191L&r5{rےꁻ剱BzɑbͱbR+lHؐ.026066] pinctrl core: initialized pinctrl subsystem [ 0.027236] NET: Registered protocol family 16 [ 0.028666] FMA: preallocated 256 KiB xool for atomic coherent allocations [ 0.029825] thermal_.'lVkѕɕٕɹɁѕ}Rnrꁍ遪ٕɹɁnuC[ 0.030357] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.030369WشWIWV-+ˋj᥵m watchpoint size is 8 bytes. [ 0.055130] cryptd: max_cpu_qlen set to 1000 [ 0.056986] iommu: Default domain type: Translated [ 0.057255] usbcore: registered new interface driver usbfs [ 0.057308] usbcore: registered nY-əɥٕr h]H+lHؐ.057358] usbcore: registered new device driver usb [ 0.058983] clocksource: Switched to clocksourcYX,5}nter [ 0.067309] NET: Registered protocol family 2 [ 0.068016] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 0.068056] TCP established hash table entries: 8192 (order: 3, 32ͱbear) [ 0.068137] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.068266] TCP: Hash tables configured (established 8192 bind 8192) [ 0.068413] UDP hash table entries: 512 (order: 2, 16384 byt? +H+lHؐ.068482] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.068708] NET: Registered protocol family 1 [ 0.069653] hw perfevents: no intY.?W)ߖV+ɽperty for /pmu, guessing. [ 0.069941] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available [ 0.072148] Initialise system trusted keyrings [ 0.072423] workingse:0timestamp_bits=30 max_order=18 bucket_order=0 [ 0.076703] Key type asymmetric registered [ 0.076728] Asymmetric key parser 'x509' registered [ 0.076790] bounce: pool size: 64 pages [ 0.077891] sun4i-usb-phy 1c13400.phy: Couldn't get regulator usb0_vbus... Deferring probe [ 0.080083] sun4i-pinctrl01,&nNܘpinctrl: supply vcc-pi not found, using dummy regunavor [ 0.082033] sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 0.091505] Serial; 8250/16550 driver, 8 ports [ 0.091785] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pb not found, using dummy regulator [ 0.112414] 1c28000.serial: ttyS0 at MMR şJb}Ց = 1500000) is a 16550A [ 0.721249] printk: console [ttyS0] enabled [ 0.746912] 1c28400.serial: ttySLXSSR şBJb}ՑJJ 5{[ 0.777062] 1c28800.serial: ttyS2 at MMIO 0x1c28800 (irq = 58, bX%d = 1500000) is a U6_16550PC[ 0.786240] serial serial0: tty port ttyS2 registered [ 0.7917LWخJår郚qáչյձѽ5{[ 0.820343] 1c28c00.serial: ttyS3 at MMIO 0x1c28c00 (irq = 59, base_baud = 1500000) is a U6_16550A [ 0.850350] 1c29000.serial: ttyS4 at MMIO 0x1c29000 (irq = 60, base_baud = 1500000) is a U6_16550A [ 0.880438] 1c29400.serial: ttyS5 at MMIO 0x1c29400 (irq = 61, base_baud = 1500000) is a U6_16550A [ 0.910380] 1c29800.serial: ttyS6 at MMIO 0x1c29800 (irq = 62, base_bauv = 1500000) is a U6_16550A [ 0.940314] 1c29c00.serial: ttyS7 at MMIO 0x1c2N,nLؔZ~HO؛& V%ՑJJ 5{[ 0.951750] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.9582<6] ehci-platform: EHCI generic platform driver [ 0.964138] ohci_hcd: USB 1.1 'Open6onroller (OHCI) Driver [ 0.970427] ohci-platform: OHCI generZ,l\XKɥٕ5{[ 0.977944] sunxi-rtc 1c20d00.rtc: registered as rtcNC[ 0.983253] i2c /dev entries driver [ 0.988051] axp20x-i2c 0-00& aAZXaA2չ5{[ 1.001329] vdd-rtc: supplied by regulator-dummy [ 1.007126] avcc: supplied by regulator-dummy [ 1.012294] ldo3: supplied by regulator-dummy [ 1/016737] ldo4: Bringing 3300000uV into 2800000-2800000uV [ 1.022886] ldo4: supplied by regulator-dummy [ 1.027886] ldo5: supplied by regulator-dummy [ 1.033035] vdd-cpu: supplied by regulator-dummy [ 1.038177] vdd-sys: Bri~ging 1250000uV into 1400000-1400000uV [ 1.044553] vdd-sys: supplied by regulator-dummy [ 1.049660] axp20x-i2c 0-0034: AXP20X driver loaded [ 1.055818] at24 1-0050: suppl^ػ,l닁չյձѽ5{[ 1.063065] at24 1-0050: 256 byte 24c02 EEP[OM> read-only [ 1.071851] rtc-p,jɕd as rtc0 [ 1.078073] rtc-pcf8523 1-0068: setting system clock to 2023-02-28T06:48:46 UTC (1677566926) [ 1.087371] i2c i2c-2: using pinctrl states for GPIO recovery [ 1.093257] gpio-52 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 1.102177] i2c i2c-2: using generic GPIOs for recovery [ 1.110759] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowX^Jj[ 1.119374] watchdog: watchdog0 running and kernel based pre-userspacehandlY.lYZ|,VH[ 1.134113] NET: Registered protocol family 10 [ 1.134216] sunxi-mmc 1c0f000.mmc: Got CD GPIO [ 1.143905] sunxi-mmc 1c12000.mmc: allocated mmc-pwrseq [ 1.143911] Segment Routing with IPv6 [ 1.143992] NET: Registered protocol family 17 [ 1.1574] Registering SWP/SWPB emulation handler [ 1.164446] registered taskstats ver {Slx+lHؐL)ªsmpiled-in X.509 certificates [ 1.168921]sunxi-mmc 1c11000.mmc: initialized, max. request size: 16384 KB [ 1.181002] sunxi-m[,Ln&nLܗ[[,'Z+镑jṃߥ¢Z 5{+lHؐL)ºpplied by usb0-vbus [ 1.188544] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB [ 1.194215] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.204569] random: fast init done [ 1.208449] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.216618] ehci-platform 1c14000.usb: irq 43, io mem 0x01c14000 [ 1.218509] mmc2: queuiog unknown CR*l]]Yؘ80 (2 bytes) [ 1.229742] mmc2: queuing unknown CIS tuple 0x80 (3 bytes) [ 1.236744] mmc2: queuing unknown CIS tuple 0x80 (3 bytes) [ 1.244971] mmc2: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.248998] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.251388] mmc2: queuing0nknown CIS tuple 0x81 (1 bytes) [ 1.256780] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 %c5{+lHؐLIªr݁3MC card at address 0001 WbɥX][jrɽՍ*! [ 1.282424] usb usb1: Manufacturer: Linux 5.10.33-venus-1 ehci_hcd [ 1.293398] usb usb1: SerialNumber: 1c14000.usb [ 1.294076] mmcblk1: mmc1:0001 MMC4GB 3.64 GiB [ 1.298753] hub NKܝL M չ5{[ 1.30317] m[,,k+jc1:0801 MMC4GB partition 1 2.00 MiB [ 1.306412] hub 1-0:1.0: 1 port detected [ 1.312842] mmcblk1boot1: mmc1:0001 MMC4GB partitioo 2 2.00 MiB %c5{[ 1.328158] ehci-platform 1c1c000.usb: new USB bus rVkѕɕ us number 2 [ 1.329529] mmcblk1: p1 p2 p3 p4 < p5 > +lHؐLi끿-platfKşrJbJşj[ 1.369017] ehci-platfor[L,nLܗ].,'U*(l& хed, EHCI 1.00 [ 1.37536LW].,].,&'l(lYYWk֫JY"ٛJAɽՍÂb٥rjR[ 1.383650] usb usb2: New USB device strings: MfrbɽՍbɥ9յ=1 %c5{rʪjՙɕbrrj*}5{[ 1.395898] mmc2: new high speed SDIO card at address 000LC+lHؐLʢsb2: SerialNumber: 1c1c000.usb [ 1.402595] hub 2-0:1.0: USB hub found [ 1.421652] ohci-platform 1c14400/usb: Generic Platform OHCI controller [ 1.428563] ohci-platform 1c14400.usb: new USB bus registered, assigoed bus number 3 [ 1.436623] ohciKXKrObJj[ 1.513193] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10 [ 1.521492] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.528708] usb usb3: Product: Generic Platform OHCI controller [ 1.534649] usb usb3: Manufacturer: Linux 5.10.33-venus-1 ohcZ5{+lHؐLɥ9յr5{[ 1.546875] hub 3-0:1.0: USB hub found %5{[ 1.ñљɵşrr݁M 3-0:1ەɕd, assigned bus number 455664] ohci-platfor[L,7&:ɥñљ! [ 1.570683] ohci-platform 1c1c400.usb: irq 48, io mem 0x01c1c400 [ 1.643205] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10 [ 1.651504] usb usb4: New USB dewice strings: Mfr=3, Producv=2, SerialNumber=1 %5{~+lHؐLɲjՙɕbrrkz}5{+lHؐLɺ¢ɥ9յşr5{[ 1.676098] hub 4-0:1.0: USB hub found [ 1.679959] hub 4-0:1.0: 1 port detected [ 1.684891] usb_phy_generic usb_phy_generic.0.auto: supply vcc not fo]յձѽ5{[ 1.694362] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver [ 1.700571] musb-hdrc musb-hdrc.1.auto: new US b].lVkѕɕ igned bus numer5 [ Lr݁M ٥չJY"ٛJAɽՍÂb٥rj[ 1.716942] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.724193] usb usb5: Product: MUSB HDRC host driver [ 1.729173] usb usb5: Manufacturer: Linux 5.10.33-venus-1 musb-hcd [ 1.735347] usb usb5: SerialNumber: musb-hdrc.1.auto [ L颂ϚՉjҊrM չ5{[ 1.744735] hub 5-0:1.0: 1 port detected [ 2.188988] usb 5-1: new high-speed USB device number 2 using musb-hdrc [ 2.369386] usb 5-1: New USB device found, idVendor=0bda, idProduct=d723, bcdDevice= 2.00 [ 2.377560] u.,MKL'l(lYYWk.-jbɽՍbɥ9յj[ 2.384723] usb 5-1: Product: 802.11n WLAN Adapter [ 2.389526] usb 5-1: Manufacturer: Realtek [ 2.393619] usb 5-1: SerialNumber: 00e04c000001 [ 3.289650] at24 2-0050: 256 byte 24c02 EEPROM, read-only [ 3.296218] input: button as /devices/platform/button/input/input0 [ 3.309322] EXT4-fs (mmcblk1p2): INFO: recovery required on readonly filesystem [ 3.316644] EXT4-fs (mmcblk1p2): write access will be enabled during recovery [ 3.429045] EXT4-fs (mmcblk1p2): recovery complete [ 3.434502] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 3.442723] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 3.449691] devtmpfs: mounted [ 3.454105] Freeing unused kernel memory; 1024K [ 3.458803] Run /sbin/init as init process INIT: version 2.88 booting [ 3.866068] EXT4-fs (mmcblk1p5): recovery complete [ 3.871262] EXT4-fs (mmcblk1p5): mountYilesystem with ordered data mode. Opts: (null) data partition is fine Starting udev [ 4.0209NMW]YX.WW Irj[ 4.043081] random: udevd: uninitialized urandom read (16 bytes read) [ 4.050251] random: udevd: uninitialized urandom read (16 bytes read) [ 4.056800] random: udevd: uninitialized urandom read (16 bytes read) [ 4.096871] udevd[107]: starting eudev-3.2.8 [ 4.340503] libphy: Fixed MDIO Bus: probed [ 4.376367] sun4i-mdio 1c0b080.mdio: supply phy not found, using dummy regulXK5{[ 4.399227] sun4i-emac 1c0b000.ethernet: eth0: at (ptrval), IRQ 35 MAC: c0:61:9a:b1:b4:e1 [ 4.429777] libphy: sun4i_mii_bus: probed [ 4.461513] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 4.477957] pwm-beeper buzzer: supply amp not founf, using0dummy regulator [ 4.487335] input: pwm-beeper as /devices/platform/buzzer/input/input1 [ 4.530146] Bluetooth: Core ver 2.22 [ 4.533867] NET: Registered protocol family 31 [ 4.538354] Bluetooth: HCI evice anf connection manager initialized [ 4.544864] Bluetooth: HCI socket layY.Z+YC[ 4.549842] Bluetooth: L2CAP socket layer initialized [ 4.590814] Bluetooth: HCI UART driver ver 2.3 [ 4.595311] Bluetooth: HCI UART protocol H4 registered [ 4.600937] Bluetooth: HCI UART protocol Broadcom registered [ 4.60NN& µµ"5 set [ 4.613046] usbco{e: regZ.W-face driver btusb [ 4.634820] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 4.641592] Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000d lmp_ver=08 lmp_subver=8723 [ 4.649038] CAN device driver interface [ 4.657055] Bluetooth: hci0: RTL: rom_version status=0 version=2 [ 4.663247] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723d_fw.bin [ 4.663919] sun4i_can 1c2bc00.cXK"٥ەɕمJJj[ 4.680829Wءuetooth: hci0: RTL: loading rtl_bt/rtl8723d_config.bin [ 4.688081] Bluetooth: hci0: RTL: cfg_sz 10, total sz 28214 [ 4.700090] sun4i-drm display-engine: bound 1e00000.display-frontend (ops sun4i_frontend_driver_exit [sun4i_frontend]) [ 4.711414] sun4i-drm display-engine: bound 1Y&nLܘdisplay-frontend (ops sun4i_frontend_driver_exit [sun4ieɽѕR[ 4.722781] su4i-drm display-engine: bound 1e60000.display-backend (ops sun4i_backend_ops [sun4i_backend]) [ 4.732659] sun4i-drm display-engine: attempt to add DMA range to existZR+WH[ 4.Sչɵ嵿չd 1e40000.display-backend (ops sun4i_backend_ops [sun4i_backendWJC[ 4.751211] sun4i-drm display-engine: No panel or bridge found... RGB output disabled [ 4.759230] sun4i-drm display-engine: bound 1c0c000.lcd-cɁz4i_tcon_platform_driver_exit [sun4i_tcon]) [ 4.770724] sun4i-drm display-engine: No pael or bridge found... RGB output disabled [ 4.778733] sun4i-drm display-enginY'lnd 1c0d000.lcd-controller (ops sun4i_tcon_platform_driver_exit [sun4i_tcon]JC[ 4.790699] lima 1c40000.gpu: gp - malZߘ version major 1 minor 1 [ 4.797007] limXL,7&nLWjjɁjɁj[ 4.803651] lima 1c40000.gpu: pp1 - mali400 version major 1 minor 1 [ 4.810134] lima 1c40000.gpu: l2 cache 64K, 4-way, 64byte cache lin -ѕɹ5{[ 4.821280] sun4i-drm displX^K˫չrBz}}ɥٕ}}ɵ}R[ 4.82263;] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1 [ 4.8ima 1c40000.gpu: bus rate = 300000000 [ 4.844423] lima 1c40000.gpu: mod rate = 384000000 [ 4.859684] [drm] Initialized lima 1.1.0 20191231 for 1c40000.gpu on minor 0 [ 4.870289] [drm] Initialized sun4i-drm 1.0.0 20150629 for display-engine on minos 1 [ 4.870622] 8723du: loading out-of-tree module taints kernel. [ 4.879692] brcmfmac mmc2:0001:1: Direct firmware load for brcm/crcmfmac43430-sdio.victronenergy,cerbo-gx.txt failed with error -2 [ 4.947465] RTW: module init start =ajj[ 4.947482] RTW: build time: Apr 16 2022 08:40:34 [ 4.947486] RTW: rtl8723du BT-Coex version = COEX20200103-3535 [ 4.963442] Conݥэ to colour frame buffer device 240x67 [ 5.061803] cerbo-gx-adc 3-0012: Cerbo GX ADC hw 2, fw 4 [ 5.078153] Bluetooth: hci1: BCM: chip id 94 [ 5.080573] Bluetooth: hci1: BCM: features 0x2e zj[ 5.083137] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available 5zzсۚҪҪrrrBe2]%Êj*"25{[ 5.111703] Bluevooth: hci1: BCM43430A1 [ 5.111727] Bluetooth: hci1: BCM43430A1 (001.002.009) build 0000 [ 5.116201] Bluetooth: hci1: BCM43430A1 'brcm/BCM43430A1.hcd' Patch [ 5.176541] Bluetooth? hci0: RTL: fw version 0x826c8873 [ 5.183327] RTW: HW EFUTH[ 5.183349] RTW; 0x000: 29 81 40 7C 01 88 07 00 A0 04 EC 35 12 C0 A2 D8 [ 5.183397] RTW: 0x010: 23 23 23 23 23 23 26 26 26 26 26 02 FF FF FF FF [ 5.183437] RTW: 0x020: FF FF FF FF FF FF FF FF FF FF FG FF FG FF FF FF [ 5.183477] RTW: 0x030: FF FF FF FF FF FF FF FF FF FF 24 24 24 23 23 23 [ 5.183518] RTW: 0x040: 27 27 27 26 26 02 FF FF FF FF FF FF FF FF FF FF [ 5.183558] RTW: 0x050: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 5.183598] RTW: 0x060: FF FF FF FF FF FF FF FF FF FF FF FF FF FF0FF FF [ 5.183638] RTW: 0x070: FF GF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 5.183679] RTW: 0x080: FF FF FF FF FF FF FF FF FF FF FF FF FF F FF FF [ 5.183719] RTW: 0x090: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 5.183759] RTW: 0x0A0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 5.183SQ]郂2;;;2;;;Â2;j[ 5.183840] RTW: 0|0C0: FF 29 20 51 00 E6 00 FF 00 FF 11 FF FF FF FF FF [ 5.183880] RTW: 0x0D0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 5.183920] RTW: 0x0E0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 5.183960] RTW: 0x0F0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 5.184001] RTW: 0x100: DA 0B 23 D7 C7 46 07 F0 B0 40 F0 83 B2 09 03 52 [ 5.184042] RTW: 0x110: 65 61 6C 74 65 6B 16 03 38 30 &&l6nHnHS&nHC[ 5.184082] RTW: 0x120: 57 4C 41 4E 20 41 64 61 70 74 65 72 00 FF FF FF [ 5.184123] RTW: 0x130: FF FF FF FF FF FF FF FG FF FF FF FF FF FF FF FF [ 5.184163] RTW: 0x140: FF FF FF FF FF FF FF 0F FF FF FF FF FF FF FF FF [ 5.184203] RTW: 0x150: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF C[ 5.184244] RTW: 0x160: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 5.184284] RTW: 0x170: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 5.184325] RTW: 0x180: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 5.184365] RTW: 0x190: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 5.184405] RTW: 0x1A0: FF FF FF FF FF FG FF FF FF FF FF FF FF FF FF G [ 5.184445] RTW: 0x1B0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 5.184486] RTW: 0x1C0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF0FF FF [ 5.184526] RTW: 0x1D0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 5.184566] RTW: 0x1E0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 5.184607] RTW: 0x1F0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF [ 5.184785] RTW: hal_com_config_channel_plan chplan:0x20 [ 5.268696] RTW: [{F_PATH] ver_id.RF_TYPE:RF_1T1R [ 5.268715] RTW: [RF_PATH] HALSPEC's rf_reg_trx_path_bmp:0x11, rf_reg_path_avail_num:1, max_tx5ot:1 [ 5.268720] RTW: [RF_PATH] PG's trx_path_bmp:0x00, max_tx_cnt:0 [ 5.268726] RTW: [RF_PATH] Registry's trx_path_bmp:0x00, tx_path_lmt:0, rx_path_lmt:0 [ 5.268731] RTW: [RF_PATH] HALDATA's trx_path_bmp:0x11, max_tx_cnt:1 [ 5.268735] RW: +*υB1Q߁ۙ}U}rյQхIAѡ:1 [ 5.268743] RTW: [TRX_N HALSPEC - tx_nss:1, rx_nss:1 [ 5.268748] RTW: [TRX_Nss] Registry - tx_nss:0, rx_nss:0 [ 5.268752] RTW: [TRX_Nss] HALFATA - tx_nss:1, rx_nss:1 [ 5.268760] RTW: txpath=0x1, rxpath=0x1 [ 5.268765] RTW: txpath_1ss:0x1, num:1 [ 5.270328] RTW: rtw_regsty_chk_target_tx_power_valid return _FALSE for band:0, path:0, rs:0, t:-1 [ 5.273096] RTW: rtw_ndev_init(wlan1) if1 mac_addr=f0:b0:40:f0:83:b2 [ 5.275115] RTW: rtw_ndev_init(wlan2) if2 mac_addr=f2:b0:40:f0:83:b2 [ 5.277970] usbcore: registered new interface driver rtl8723du [ 5.276981] RTW: module init ret=0 [ 5.701294] rando[',.R+5{[ 5.701305] random: 4 urandom warning(s) missed due to ratelimiting [ 5.918542] rtl8723du 5-1:1.2 disabled-wlan1: renamed from wlan1 [ 5.953642] rtl8723du 5-1:1.2 ap0: renamed from wlan2 [ 5.981977] brcmfmac mmc2:0001:1 wZV med grom wlan0 [ 6.092378] sun4i-drm display-engine: [drm] fb0: sun4i-drmdrmfb frame suffer device [ 6.099667] edt_ft5x06 2-0038: touchscreen probe failed [ 6.107715] backlight gxdisp-2-0051: GX Display backlight rev 0 [ 10.489015] Bluetooth: hci1: command 0xfc18 tx timeout [ 19.049019] Bluetooth: hci1: BCM: failed to write update baudrate (-110) [ 19.204453] Bluetooth: hci1: BCM43430A1 [ 19.208303] Bluetooth: hci1: BCM43430A1 (001.002.009) build 0000 [ 19.216624] Bluetooth: hci1: BCM: Using default device address (aa:aa:aa:aa:aa:aa) [ 19.735865] EXT4-fs (mmcblk1p2): re-mounted. Opts: (null) [ 19.741444] ext4 filesystem being remounted at / supports timestamps until 2038 (0x7fffffff) Starting watchdog [ 21.127449] watchdog: watchdog0: watchdog did not stop! INIT: Entering runlevel: 5 Configuring network interfaces... done. Starting system message bus: Setting up watches. Watches established. /var/run/dbus/ CREATE system_bus_socket Starting random number generator daemon Initializing available sources Failed to init entropy source hwrng Initializing AES buffer Enabling JITTER rng support Initializing entropy source jitter . Starting haveged: haveged: listening socket at 3 haveged: haveged starting up [ OK ] Starting bluetooth: bluetoothd. starting DNS forwarder and DHCP server: dnsmasq... done. starting DNS forwarder and DHCP server: dnsmasq.ap... done. [ 37.466751] NQ_Registered protocol family 38 Starting syslogd/klogd: done * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon [ ok ] Starting php-fpm done Starting Connection Manager Starting Hiawatha Web Server: hiawatha. starting IPv4LL configuration daemon: avahi-autoipd... done. starting resolv.conf manager: resolv-watch... done. dbus-daemon[696]: [system] Activating service name='fi.w1.wpa_supplicant1' requested by ':1.2' (uid=0 pid=779 comm="connmand --nodnsproxy --nodaemon ") (using servicehelper) Starting crond: OK dbus-daemon[696]: [system] Successfully activated service 'fi.w1.wpa_supplicant1' [ 38.799180] device eth0 entered promiscuous mode Checking available software versions... Active rootfs: 1 Active version: 20220419072633 v2.77 Filesystem errors detected on backup rootfs /etc/rc5.d/S99custom-rc-late.sh: line 5: /data/rc.local: No such file or directory Last login: Tue Feb 28 06:31:01 +0000 2023 on /dev/ttyS0. root@einstein:~# [ 41.580562] IPv6: ADDRCONF(NETDEV5*TIbە5{[ 46.760857] can: controller area network core [ 46.76MLSrQ郒ɕѽj[ 46.802413] IPv6: ADDRCONF(NETDEV_CHANGE): can0: link becomes seady [ 47.017190] can: raw protocol [ 47.310083] RTW: port switch - port0(ap0), port1(disabled-wlan1) [ 47.795206] slcan: serial line CAN interface driver [ 47.800297] slcan: 10 dynamic interface channels. [ 48.212700] RTW: assoc success [ 48.215989] IPv6: ADDRCONF(NETDEV_CHANGE): ap0: link becomes ready [ 68.224226] can1: renamed from slcan0 [ 48.269130] RTW: set group key camid:0, addr:f2:b0:40:f0:83:b2, kid:1, type:TKIP