# This is from my configuration.yaml - might make it an include in future

input_number:
  slider_multiplus_ac_setpoint:
    name: MultiPlus AC Export
    initial: 0
    min: 0
    max: 500
    step: 1
    unit_of_measurement: W
    icon: mdi:home-lightning-bolt

  slider_multiplus_grid_setpoint:
    name: MultiPlus Grid Setpoint Export
    initial: 0
    min: 0
    max: 500
    step: 1
    unit_of_measurement: W
    icon: mdi:home-lightning-bolt

  slider_multiplus_max_feed:
    name: MultiPlus Max Feed
    initial: 150
    min: 0
    max: 500
    step: 1
    unit_of_measurement: W
    icon: mdi:home-lightning-bolt

input_boolean:
    grid_neutral_toggle:
      name: Enable Battery Feed
      icon: mdi:home-battery
    multiplus_control_loop_toggle:
      name: Enable Control Loop
      icon: mdi:home-battery

modbus:
  name: victron
  type: tcp
  host: 192.168.X.X
  port: 502
  delay: 5
  timeout: 5

  sensors:
        # This is the Mode 3 magic register
      - name: MultiPlus Mode3 Setpoint
        data_type: int16
        scan_interval: 3
        slave: 228
        address: 37
        unit_of_measurement: W
        device_class: power
        state_class: measurement

      # Unused (mode 2)
      - name: MultiPlus Grid Setpoint
        data_type: int16
        scan_interval: 10
        slave: 100
        address: 2700
        unit_of_measurement: W
        device_class: power
        state_class: measurement
        
      - name: MultiPlus PV Power
        data_type: int16
        scan_interval: 5
        slave: 100
        address: 850
        unit_of_measurement: W
        device_class: power
        state_class: measurement
        
      - name: MultiPlus Grid Power
        data_type: int16
        scan_interval: 5
        slave: 100
        address: 820
        unit_of_measurement: W
        device_class: power
        state_class: measurement
        
      - name: SmartSolar PV Lifetime Yield
        data_type: int16
        scan_interval: 5
        slave: 229
        address: 790
        scale: 0.1
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        
      - name: SmartSolar PV Today Yield
        data_type: int16
        scan_interval: 5
        slave: 229
        address: 784
        scale: 0.1
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: measurement
        
      - name: SmartSolar PV Yesterday Yield
        data_type: int16
        scan_interval: 3600
        slave: 229
        address: 786
        scale: 0.1
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: measurement
        
      - name: MultiPlus Battery Power
        data_type: int16
        scan_interval: 5
        slave: 100
        address: 842
        unit_of_measurement: W
        device_class: power
        state_class: measurement
        
      - name: MultiPlus Battery Voltage
        data_type: int16
        scan_interval: 5
        slave: 100
        address: 840
        scale: 0.1
        precision: 1
        unit_of_measurement: V
        device_class: voltage
        state_class: measurement

      - name: MultiPlus Battery SoC
        data_type: int16
        scan_interval: 5
        slave: 100
        address: 843
        unit_of_measurement: '%'
        device_class: battery
        state_class: measurement

      - name: MultiPlus Mode3 Battery SoC
        data_type: int16
        scan_interval: 5
        slave: 228
        address: 30
        scale: 0.1
        precision: 1
        unit_of_measurement: '%'
        device_class: battery
        state_class: measurement

  switches:
    - name: enable_inverter
      slave: 100
      address: 2702
      command_on: 100
      command_off: 0

    - name: enable_charger
      slave: 100
      address: 2701
      command_on: 100
      command_off: 0

    - name: suppress_output
      slave: 228
      address: 39
      command_on: 1
      command_off: 0