com.victronenergy.battery

/Dc/0/Voltage               <- V DC
/Dc/0/Current               <- A DC positive when charged, negative when discharged
/Dc/0/Power                 <- W positive when charged, negative when discharged
/Dc/0/Temperature           <- °C Battery temperature (BMV-702 configured to read
                               temperature only)
/Dc/0/MidVoltage            <- V DC Mid voltage (BMV-702 configured to read midpoint
                               voltage only)
/Dc/0/MidVoltageDeviation   <- Percentage deviation

/Dc/1/Voltage               <- V DC - Starter voltage (BMV-702 configured to read starter
                               battery voltage only)

/ConsumedAmphours           <- Ah (BMV, Lynx BMS).
/Soc                        <- 0 to 100 % (BMV, BYD, Lynx BMS)
/TimeToGo                   <- Time to in seconds (BMV "SOC relay/discharge floor" value, Lynx BMS).  Max value 864,000 when battery is not discharging.

DVCC & BOL related paths. These are published by batteries.
/Info/MaxChargeCurrent      <- Charge Current Limit aka CCL 
                               (BYD, Lynx BMS and FreedomWon)
/Info/MaxDischargeCurrent   <- Discharge Current Limit aka DCL
                               (BYD, Lynx BMS and FreedomWon)
/Info/MaxChargeVoltage      <- Maximum voltage to charge to
                               (BYD, Lynx BMS and FreedomWon)
/Info/BatteryLowVoltage     <- Note that Low Voltage is ignored by the system
                               (BYD, Lynx BMS and FreedomWon)

For all alarms: 0=OK; 1=Warning; 2=Alarm
/Alarms/Alarm              <- Generic alarm condition (deprecated; ignored by GUI & VRM)
/Alarms/LowVoltage         <- BMV, BYD, Lynx BMS
/Alarms/HighVoltage        <- BMV, BYD, Lynx BMS
/Alarms/LowStarterVoltage  <- BMV-702 configured to read starter battery voltage only
/Alarms/HighStarterVoltage <- BMV-702 configured to read starter battery voltage only
/Alarms/LowSoc             <- BMV, Lynx BMS
/Alarms/HighChargeCurrent  <- BYD
/Alarms/HighDischargeCurrent <- BYD
/Alarms/CellImbalance      <- BYD
/Alarms/InternalFailure    <- BYD
/Alarms/HighChargeTemperature <- BYD
/Alarms/LowChargeTemperature  <- BYD
/Alarms/LowCellVoltage     <- Lynx BMS
/Alarms/LowTemperature     <- BMV, Lynx BMS, BYD
/Alarms/HighTemperature    <- BMV, Lynx BMS, BYD
/Alarms/MidVoltage         <- Midpoint deviation, BMV only when configured to monitor
                              the midpoint.

/Settings/HasTemperature
/Settings/HasStarterVoltage
/Settings/HasMidVoltage

/Relay/0/State

/History/DeepestDischarge
/History/LastDischarge
/History/AverageDischarge
/History/ChargeCycles
/History/FullDischarges
/History/TotalAhDrawn
/History/MinimumVoltage
/History/MaximumVoltage
/History/TimeSinceLastFullCharge
/History/AutomaticSyncs
/History/LowVoltageAlarms
/History/HighVoltageAlarms
/History/LowStarterVoltageAlarms
/History/HighStarterVoltageAlarms
/History/MinimumStarterVoltage
/History/MaximumStarterVoltage
/History/DischargedEnergy
/History/ChargedEnergy

Lynx BMS & Lynx Ion Only:
/State
/ErrorCode
/SystemSwitch
/Balancing
/System/NrOfBatteries
/System/BatteriesParallel
/System/BatteriesSeries
/System/NrOfCellsPerBattery
/System/MinCellVoltage
/System/MaxCellVoltage
/Diagnostics/ShutDownsDueError
/Diagnostics/LastErrors/1/Error
/Diagnostics/LastErrors/2/Error
/Diagnostics/LastErrors/3/Error
/Diagnostics/LastErrors/4/Error
/Io/AllowToCharge
/Io/AllowToDischarge
/Io/ExternalRelay
/History/MinimumCellVoltage
/History/MaximumCellVoltage