I will use BMV-700 in remote location to monitor battery SOC over the Internet. To do this, I want to read VE.Direct output (RS-232) and convert it to a DC voltage 0-10V, connected to a remote monitoring system (10V = 100% SOC). There are many industrial RS-232 to DC converter modules available (e.g. LTS61 from Laurels).
My problem is that: "On power up, a VE.Direct interface will always be in Text-mode, and continuously transmits all runtime fields.” Is it possible to force the BMV-700 VE.Direct Text-mode to transmit SOC readings only? (I will not use HEX-messages.)