question

Bill avatar image
Bill asked

Just wanted to give Kudos to the Developers after they fixed the BT range on the Smart Battery Sense!

When I first added the SBS last December, my SS 100/50 controller could not connect to the SBS unless I left both the RV compartment doors open. After one of the last upgrades, that is no longer the case, my 100/50 sees the Battery Temp and Voltage with the doors closed!

Yahoo! -Bill


Its not good to leave the compartment doors open while driving... :)

BluetoothSmart Battery Sense
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Guy Stewart (Victron Community Manager) avatar image
Guy Stewart (Victron Community Manager) answered ·

Thanks for the Thanks!

I’ll pass on the message to the tirelessly working firmware team that you are enjoying the updates :)

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Thomas H. Clancy avatar image
Thomas H. Clancy answered ·

Maybe they can do the same for the BMV712 ?

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Thomas H. Clancy avatar image Thomas H. Clancy commented ·
And one of my mppt chargers definitely has a lower output then the rest, doesn't exchange data with the smart network, is continuously loosing connection. Ofc out of warranty.
0 Likes 0 ·