question

bathnm avatar image

VRM Dash Board View

Hello,

I really like the dash board. I added a new shunt to the system to monitor my wind generator output. This has not turned up on the dash board, which has surprised me.

Does anyone know if there is any way top control which devices do appear on the dash board? If not could a feature be requested to allow the user to select which battery devices/shunts do get displayed.

1614512588307.png

VRM
1614512588307.png (296.0 KiB)
2 |3000 characters needed characters left characters exceeded

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
mvader (Victron Energy) avatar image
mvader (Victron Energy) answered ·

Hey @Bathnm, try Settings -> System setup -> MFD battery.


its near the bottom in that menu. Does that work?


as then we need to clean it up:

- make it clear in manuals how to configure this

- rename that setting in that menu

1 comment
2 |3000 characters needed characters left characters exceeded

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

bathnm avatar image
bathnm answered ·

@mvader (Victron Energy), Many thanks. Yes that did it. Now you have provided the direction, I remember asking the question before. Be good if possible to also add to the VRM display the Current for all the displayed monitors as well as the voltage.

2 |3000 characters needed characters left characters exceeded

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.