I have a blue smart IP22 12/30 Interrupted over and over again

Question

question

rob1evans asked Jan 22, '21

I have a blue smart IP22 12/30 my battery bank is 4 300ah lifpo4 battery's,

I have set the charge voltage to 14.6v with the custom setting as recommended by the battery manufacturer.

removed the charge time limit as its a large bank.

The charger charged to 1kah and has moved to absorption charge at 14.6v but keeps being interrupted over and over again after charging around 0.5AH.

what is wrong have I set something wrong or could there be a fault with the charger.

Regards Rob

battery charging

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 1 · 2021-01-22T16:43:50Z

lehrling answered · Jan 22, 2021 at 04:43 PM

Please clarify what you mean by "keeps being interrupted over and over again".

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 2 · 2021-01-22T18:15:21Z

rob1evans answered · Jan 22, 2021 at 06:15 PM

Restarting a charge without finishing, Regards Rob

screenshot-20210122-104233.jpg (219.7 KiB)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 3 · 2021-01-22T18:59:54Z

lehrling answered · Jan 22, 2021 at 06:59 PM

What is the AC power source for the IP22?

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 4 · 2022-05-21T22:17:19Z

sma76 answered · May 21, 2022 at 10:17 PM

Hi

Im new here, have the same problem, was thiere an out come?

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.