System is LiFePO4 12v battery (EVE 2p4s), REC BMS, CCGX, Multiplus (3000/12/230/50) and smartsolar 100/30.
Has DC System turned on and REC BMS (for Victron), CCGX, Multiplus and MPPT are all playing nicely.
Battery is at 70%, inverter is on but no AC load, MPPT output is 29A.
CCGX is displaying a 158w DC load. Removed all dc fuses to ensure that there was no load other than system control and idle Multiplus and DC load did not change. Turned Multiplus off via CCGX and no change to DC load.
Check REC BMS and only 14.22A to battery is displayed.
Where is the other approximately 13 amps going?