question

adastra avatar image

Non Victron components on Cerbo GX

i would like to connect my alternator and wind generator to the Cerbo GX so I can monitor each of their individual contubutions to charging the batteries. I understood that the Victron Smartshunt would do that but now I understand that it won't.

Any assistance would be very much appreciated.

cerbo gx
2 |3000 characters needed characters left characters exceeded

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
wkirby avatar image
wkirby answered ·

When a Smartshunt is connected to the CerboGX is will be mesuring battery current as intended.
Additional Smartshunts can be connected and will be visible in the Device Listbut only one of them can be selected as the battery shunt. It is not possible to configure additional Smartshunts to measure energy sources.

2 |3000 characters needed characters left characters exceeded

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.