question

Ingo avatar image
Ingo asked

VEConfigure 3 with ESS Assistant and Freedomwon LiFePo4 Battery Capacity bug.

I am trying to setup VEConfigure as per the Victron/Freedomwon setup guide but every time I enter my battery capacity (200AH) in the ESS assistant it then enables the Quattro Battery Monitor again.

Once I disable the Quattro Battery Monitor my battery capacity in the ESS assistant changes to 10Ah.


And from the official setup guide it's after this step.


Any advice on doing this correctly and getting 200Ah in my ESS setup?

VEConfigure 3
1597735023510.png (13.8 KiB)
1597735083788.png (6.9 KiB)
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

0 Answers