question

Christian Lindermann avatar image
Christian Lindermann asked

BMV 712 partially clear history data

Goedemorgen.


Today a short question on the BMV 712.

Is it possible to clear only single data from the history?

Background is that I have invalid values in the battery voltage (eg lowest batterie voltage: 4,85V). Of course, I have not had them yet, I think these are still from the installation. Surely I could delete all values, but would like to keep the remaining valid data.

Is there a possibility? Thank you.

BMV Battery Monitorbmv 712
1 comment
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

markus avatar image markus ♦♦ commented ·

Yes, that would be a nice feature, to reset Battery Voltage min max values only.

I am sure, there are many of us, who forgot to plug out the BMV before disconnecting the Battery... :o)

0 Likes 0 ·
1 Answer
Guy Stewart (Victron Community Manager) avatar image
Guy Stewart (Victron Community Manager) answered ·

At this stage this is not possible, sorry.

If there is corruption in the data, the unit will need to be reset.

3 comments
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

tabney0315 avatar image tabney0315 commented ·

Can share how to reset a BMV? I have the BMV 712.


Thanks!

0 Likes 0 ·
Guy Stewart (Victron Community Manager) avatar image Guy Stewart (Victron Community Manager) ♦♦ tabney0315 commented ·

In setup menu,

CL HIS : Clear historic data. Clears all historical data by holding the select button for 5 seconds.


It is also in the manual.

0 Likes 0 ·
tabney0315 avatar image tabney0315 Guy Stewart (Victron Community Manager) ♦♦ commented ·

Thank you. Sorry, I checked the manual but must have missed it.

0 Likes 0 ·

Related Resources

Additional resources still need to be added for this topic