upgrading your smartsolar MPPT without resetting your Lifetime Total generated

Question

question

brinx38 asked Sep 18, '19

Hello,

I'm to figure out if the lifetime total generated is stored in my android app or in the charge controller memory.

I'm thinking about upgrading my SmartSolar MPPT, but I do not want to reset the lifetime counter.

If it is stored in the charge controller, is there a way to transfer/keep these values?

Thanks.

smart solar set-up help

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 1 · 2019-09-18T11:47:46Z

Matthias Lange - DE answered · Sep 18, 2019 at 11:47 AM

It is in the MPPT.

As far as I know you can't transfer the data's from one to another MPPT.

If you want to keep the values you have to take a piece of paper and write it down.

1

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

brinx38 commented · Sep 19, 2019 at 11:34 AM

Hmm...

Thank you..

This is a bummer.

0 ·