question

tony-towers avatar image
tony-towers asked

Max Smart Solar 250/100 in parallel

Hi

What´s the maximum number of smartsolar 250/100 connected in parallel in a system using a Venus GX?

Thanks

smart solar set-up help
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Mark avatar image
Mark answered ·

The max number of VE.Direct devices that a Venus GX can handle is 6 - but it only has 2 VE.Direct ports built in.

Refer to Venus product range comparison table;

https://www.victronenergy.com/live/venus-os:start

But, if you happen to want even more you can now use the NEW MPPT range with BOTH VE.Can and VE.Direct interfaces. The VE.Can interface can be daisy chained for upto 25 units!

https://www.victronenergy.com/blog/2019/08/06/new-product-range-ve-can-smartsolar-mppts/

https://www.victronenergy.com/solar-charge-controllers/smartsolar%20mppt%20ve.can#downloads


2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

wkirby avatar image
wkirby answered ·

You can have up to six VE.Direct devices on a Venus GX. Two with native connections, the other four will need to be connected via VE.Direct - USB dongles. You will need a USB hub with a good chipset too.
Remember a BMV is also a VE.Direct device, so five MPPT's and one BMV if you anticipate such a configuration.

https://www.victronenergy.com/live/venus-os:start


The new VE.Can MPPT's which can daisy-chain 25 in one system. However, the 250/100 models are not available yet, unfortunately.

https://www.victronenergy.com/blog/2019/08/06/new-product-range-ve-can-smartsolar-mppts/


2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic