I’ve had a SmartSolar MPPT connected and functioning correctly on a system using a VE direct cable to a Venus GX. Initially all was well but at some point the reporting seems to have been lost onto the VRM. With the solar disconnected the blue bulk light flashes and is solid with solar connected. This is DC coupled in a system which also has a Multiplus 2 and a Solis AC coupled solar inverter on the input side. I’ve today checked all wiring and changed the VE direct cable over to port 2 on the Venus with no change. The MPPT shows as charging but is just not reporting on the VRM. My next move is to try another VE direct cable, unless anyone has any suggestions. I’ve read all the other threads I can find on this to no avail.