question

pmilne avatar image
pmilne asked

Err 119 on updating MPPT 100/30 to firmware 1.39

I just used VRM to check and update the MPPT100/30 firmware and now get an error notification '#119 settings invalid' with the Bulk and Absorbtion LEDs flashing.

A reset (or several) doesn't help. Any suggestions?
What settings is it talking about? I only know the automatic voltage setting and the battery type.

MPPT Controllerserror
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Daniël Boekel (Victron Energy Staff) avatar image
Daniël Boekel (Victron Energy Staff) answered ·

Hi @pmilne

We'll contact you via support today.

6 comments
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

pmilne avatar image pmilne commented ·

Still no answer. Several more resets have failed to fix the problem.

0 Likes 0 ·
pmilne avatar image pmilne commented ·

Still no contact! Still no solar power.

Pete

0 Likes 0 ·
Show more comments
hneyra avatar image hneyra commented ·

Having same issue received error 119 on mppt 150/100 after most recent firmware update unable to get system up and running properly. Please help!

0 Likes 0 ·
pmilne avatar image
pmilne answered ·

Solar power restored very effectively with a remote reboot from Victron. Thanks guys!

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

MPPT Product Page

MPPT Error codes

MPPT 150/60 up to 250/70 Manual

Additional resources still need to be added for this topic