Dilip Kumar TD avatar image
Dilip Kumar TD asked

how feltch data PF and other parameter from ET112 to build node red dashboard

Dear team

I attempted to build my Node-red dashboard using the System parameters, however, I was unable to locate the ET112 parameter alongside other options like PF and MD.

Please give the solution for build own node-red dashboard

Energy MeterNode-REDmodificationsgui mods
1 comment
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Alistair Warburton avatar image Alistair Warburton commented ·
Where are you rying to run this query, and how?

Isnode red on a GX or somwhere external?

Are you trying to use Victron Nodes / Modbus / MQTT?

Is th meter showing up on your GX device? If not are you trying to read it seperatly from Node red?

Please post all relavent system details and your precice requirements to get a good answer.

If you are using Victron Nodes and the meter is properly configured in the GX device as a Modbus device it should show up as an energy meter node! Its data will also be available over Modbus TCP from an external Ethernet connection to your GX.

0 Likes 0 ·
0 Answers