question

jessika avatar image
jessika asked

mppt 100/20 charge output0

screenshot-2023-01-02-14-12-46-942-comvictronenerg.jpgMppt 100/20 load output always 0I have Mppt 100/20 and, in configuration it is in Batterylife, in the charge output it always puts 0...on state, current 0.0A, power 0w

Can't see the load output?
MPPT SmartSolar
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Matthias Lange - DE avatar image
Matthias Lange - DE answered Ā·

What do you have connected to the load output?
It can only show a load current if there are any loads connected.

1 comment
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

jessika avatar image jessika commented Ā·

Router, centralita de alarma, cƔmara exterior, cƔmara interior que generan un gasto de unos 15w, hay que poner algo en la salida de carga no?

0 Likes 0 Ā·
jessika avatar image
jessika answered Ā·
I appreciate the help, I am new to this, I would like to know if it is normal for the load output to put 0, when there are cameras, control unit and so on connected to the battery...
The mppt 100/20 is new too, is it broken or am I doing something wrong?
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic