question

Eric M. avatar image
Eric M. asked

Modbus: Reading AC Consumption from grid

Can't seem to find the proper Modbus registers for the values I'm looking for. When I plug my MultiPlus into grid while using AC inverted power, AC devices stay on and AC load drops to zero. Wondering, is there a way to see in Modbus the total energy coming from grid, and then still get a number for the power passed on to "AC Loads" even though that power isn't coming from my system anymore? It seems that the Grid power is showing everything coming in, but with AC Loads set to zero, my calculations are leaving alot of energy "leftover" in the system because no value is subtracting what the AC Loads inside are still using.

Modbus TCPmultiplus ve.busmodifications
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

0 Answers

Related Resources

Experiments, Modifications and Adaptions. Mods (Modifications) can be made to Victron Software by the Community. Please use the modifications space for enthusiasts who want to push what is possible, without official Victron Support.

Modbus TCP Basics

Additional resources still need to be added for this topic