Ruuvi Temperature sensors flooding menu

Question

question

klaus-deiss asked Jun 21, '22

Ruuvi Temperature sensors flooding menu

I installed four of this devices on a PI3 Venus OS v.2.82-large-30.

I'm absolutely happy with this solution. Today I had a look at the I/O / Bluetooth section. The menu is flooded with hundreds(!) of inactive entries, even difficult to scroll the menu to find the 4 active ones. I installed the devices on 3.6.22, and I fear that this is a bug?
I already noticed during installation that there came up devices which I could not access, but I did not realise that they don't disappear.

Is there already a newer "large" version available?

thx

Klaus

Raspberry Pi bug report ruuvi sensors

ruuvi-bug.jpg (87.4 KiB)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Modifications Space

Node Red Space

Answer 1 · 2022-06-22T06:49:18Z

mvader (Victron Energy) answered · Jun 22, 2022 at 06:49 AM

Hi @Klaus Deiss , yes, please install the latest v2.90 beta; there is a large build for it as well.

more info about the latest v2.90 beta is here:

https://community.victronenergy.com/questions/140258/venus-os-v29014-available-for-testing.html

and where to find the latest Venus OS large beta is also in the manual:

https://www.victronenergy.com/live/venus-os:large

It changed recently, its much better now, including the possibility to update it online, no need to use a sdcard or usb stick to update to a newer version. Note that, since you mention raspberrypi, you probably will have to flash a new sdcard this time.

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

question