question

wirehead avatar image
wirehead asked

Bug: Multiplus II State shows External Control insted of Bulk/Absorbtion

Hi,


Since i updated two installations from 2.85 to 2.90-10 they are showing in the remote console and in VRM "external control" as state of the Multiplus II insted of Bulk or Absorbtion.

1653660118777.pngInstallation Updated on 22.05.22

1653660294696.pngInstallation 2 Updated on 27.05.22

1653660399058.pngCan someone confirm the behavior or provide a solution?

Installation:

- Cebo GX; 3x Multiplus 2 48/3000; Pylontech US2000C; some PV inverter, EM24 powermeter

Multiplus-IIESSVE.Bus
1653660118777.png (42.4 KiB)
1653660294696.png (14.4 KiB)
1653660399058.png (28.2 KiB)
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

3 Answers
Stefanie (Victron Energy Staff) avatar image
Stefanie (Victron Energy Staff) answered ·

Hi @wirehead

This is not a bug. It is probably rather a matter of a correction because your Multis are BMS controlled (keyword is CVL, CCL and DCL) and lithiums don't know about bulk, absorption and float.

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

robertodbh avatar image
robertodbh answered ·

v2.90 – September 12th 2022:

  • Inverter/chargers: show state as "Ext. control"; instead of Bulk or Absorption, when controlled by a BMS/DVCC. When controlled by a BMS the inverter/charger would never show float, which caused questions. Now it just shows externally controlled, simpler, and more accurate: there is no bulk -> absorption -> float charge algorithm when controlled by BMS.
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

useeling avatar image
useeling answered ·

Might be interesting for you too, but I just noticed after installing the large-OS and implicitly upgrading to 2.93, the old "bulk" etc behaviour for the State returned (and the Ext. Control is gone).


The release notes for 2.93 are stating:

• Restore Modbus-TCP register 31, VE.Bus State. Per a recent version, that register returned "Ext. control" which broke customer implementations. Now the register will return the usual status (Bulk, Absorption, Float, etc) again, when the inverter/charger is in fact externally controlled by a smart battery.



4 comments
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

carel-burger avatar image carel-burger commented ·
Upgrading to 2.93 fix this issue for me.
0 Likes 0 ·
luupus avatar image luupus carel-burger commented ·

This is interesting, as I upgraded to 2.93, large image, and in VRM it still states:

external controlvrm-external-control.pngvictron-version.png

Any idea?

0 Likes 0 ·
useeling avatar image useeling luupus commented ·
Should have been more specific… on the dashboard it looks for me like for you, BUT if you look info „advanced“ the „VE BUS State“ diagramm now shows the „old behaviour“ again.

Br

Ulrich

0 Likes 0 ·
joker-sk avatar image joker-sk useeling commented ·
I can confirm the same behavior after upgrading to mp2 firmware 505
0 Likes 0 ·