question

norm avatar image
norm asked

Temperature, Level, Digital Output and GPS with a Raspberry Pi

Hi Guys...

I tried to figure it out how to use a RasPi 3B, a 7“ RasPi Display und Venus OS.

I would like realize following issues:

-Indication level measurement (resistive)

-Indication and processing temperature (no devices selected yet)

-Digital outputs (Relay) eg. "Heating On" if Temp min; "Water heater On", if SOC > x%

-Implementation GPS device


Right now, i installed Venus OS and its running.

Could anybody give me advice how to realize this project?

I would be so thankful for any responses.


Normen



Raspberry Pi
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Peter Buijs - NL avatar image
Peter Buijs - NL answered ·

For the GPS device, I hooked up a USB GPS mouse (NMEA0183 output) to the Raspi and it works fine.


2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

norm avatar image
norm answered ·

Hi, thanks a lot.

I just checked one USB GPS device. looks fine for me.

check

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.