question

jokani avatar image
jokani asked

Energy Meter - Alternator - GX Touch Display

At the weekend I installed a new SmartShunt to monitor amps produced from an alternator.

I can see the device in VRM, but not on the GX Touch.

What haven't I configured properly?

SmartShuntgx device
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

4 Answers
Stefanie (Victron Energy Staff) avatar image
Stefanie (Victron Energy Staff) answered ·

Hi @Jokani,

do you mean the overview on the GX Touch? You need to enable the DC Power tile (System Setup/Has DC System). I think it will be a combined (from other charge sources as well) display of power going in/out of the battery and not explicitly showing your Alternator power alone.

But you can see the SmartShunt details like voltage, current etc. in the Device List.

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

nebulight avatar image
nebulight answered ·

I think this is a feature set that is coming in the future for the GX display overview.

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

jokani avatar image
jokani answered ·

I thought the new Energy Meter functionality would mean I would get an extra box here:

1644959197350.png

I don't see it here either:


1644959557032.png


But the data is in VRM:


1644959613772.png



1644959197350.png (31.0 KiB)
1644959557032.png (50.3 KiB)
1644959613772.png (10.3 KiB)
1 comment
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Unfortunately not. That space is 'reserved' for PV power/MPPT.
0 Likes 0 ·
jokani avatar image
jokani answered ·

I think/though this had already been implemented, just that I do not have if configured correctly, maybe not.

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.