VE.Bus BMS and BlueSolar MTTP solar charger

Question

question

bskz asked Dec 28, '21

VE.Bus BMS and BlueSolar MTTP solar charger

Will VE.Bus BMS disconnect solar charger if it is connected through Venus controller in stead of direct connection between VE.Bus BMS and solar charger? It is 3 parallel Victron MultiPlus 48V, Victron VE.Bus BMS, 2 Victron smart LFP batteries in series, 2 Victron MTTP BlueSolar chargers all connected to Victron Venus controller in heart.

BMS Venus GX - VGX

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Modifications Space

Node Red Space

Answer 1 · 2021-12-28T07:44:44Z

Sarah answered · Dec 28, 2021 at 07:44 AM

The BMS should be able to control both the Multiplus and MPPT controllers charge algorithms and the ATC / ATD settings. This may operate a bit differently (current limiting setting) if you are using a beta version of the Venus software.

Image Caption

f05ed25d-4942-4066-b515-92b06417dbee.jpeg (319.5 KiB)

ae1ba025-1596-4a63-96f6-e8eb993663a0.jpeg (549.6 KiB)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 2 · 2021-12-30T15:44:37Z

bskz answered · Dec 30, 2021 at 03:44 PM

Am O doing something wrong? Or I misunderstood the point? Thanks!

screenshot-20211230-1211062.png (235.3 KiB)

screenshot-20211230-121517.png (232.2 KiB)

screenshot-20211230-121503.png (241.7 KiB)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

question