question

yeswhynot avatar image
yeswhynot asked

Which fanless chargeror powersupply can be set to specific parameter ?

hi i m new in this universe , i search for a silent charger so probably fanless that i can set for for a wheelchaire (2x 12v 75ah) charge voltage and

. Keep going until the current falls to a very low level around 1000 of capacity, or falls by less that 0.1A over an hour. Then its full.

or set the float voltage to a certain voltage.

!any suggestions?

2 can the charger be used for agm and gel batteries provided i change its setting?

3 how hard is it for a custumer to set those numbers?


psim in canada so 120 wallplug.

pps if possible charging at around 25 amp but if not possible 12 or 13 amp could be ok

chargerbattery
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

3 Answers
Alexandra avatar image
Alexandra answered ·

@yeswhynot

I use the IP65 charger for my 12v stuff

Pretty easy to use and set up with a profile and victron connect for monitoring and has some neat accessories for plugging and unplugging from it.

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

yeswhynot avatar image
yeswhynot answered ·

hi

do you have the experience to answer the questions 123? tx

2 comments
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Matthias Lange - DE avatar image Matthias Lange - DE ♦ commented ·

Install the VictronConnect app and take a look at the demo library.

0 Likes 0 ·
kevgermany avatar image kevgermany ♦♦ commented ·

@yeswhynot

I answered these in your other question.

0 Likes 0 ·
yeswhynot avatar image
yeswhynot answered ·

hi could you paste a link to what you call the library demonstrator?

thanks

1 comment
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Matthias Lange - DE avatar image Matthias Lange - DE ♦ commented ·
https://www.victronenergy.com/support-and-downloads/software

You need to download and install the VictronConnect app on your phone, tablet, PC, laptop or Mac.

0 Likes 0 ·

Related Resources

Additional resources still need to be added for this topic