question

Josep morancho avatar image
Josep morancho asked

Water tank level sensor for cerbo gx

I have an off-grid installation in an isoated house without grid acces. I have a cerbo gx and a 4G router to connect with VRM portal.


i would like to monitor also the water tank level of the house, the water tank is 4 meters deep (12.000 liters) and it is 50 meters far from cerbo gx device.


is there any tank level sensor compatible with cerbo gx but also able to deal with the distace from the cerbo and the tank depth?


thanks

cerbo gx
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

3 Answers
Mark Maritz avatar image
Mark Maritz answered ·

I'm looking for the same solution. Can anyone help?


Would like to use the CerboGX but could buy the Tank 140...

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

David Channin avatar image
David Channin answered ·

These guys have a variety of tank sensors that connect via the tank 140 GX. Haven't tried them yet but on my way...


https://www.safiery.com/tanks

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

dereppsteiner avatar image
dereppsteiner answered ·

in my camper works on cerbo gx --->> https://www.ebay.de/itm/323448320756

1 comment
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

maxbuildsvans avatar image maxbuildsvans commented ·
I installed a similar one into my camper but having issues where the grey water sensor appears to be 'stuck' I have tried updates on the Cerbo but still nothing. Just wandered if you may have similar issues?
0 Likes 0 ·