question

nudgey avatar image
nudgey asked

Can I see a combined total for both outputs of 2 MPPTs on the Bluetooth app?

Hi. I have just installed 2 smart solar charge controllers mppt 150 70. Can I see a combined total for both outputs on the Bluetooth app or do I have to read each one individually and add up the total? Thanks in advance.

solar
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

3 Answers
nickdb avatar image
nickdb answered ·

One at a time unless you have an internet attached GX, you can then pull the data from VRM or see a summary on the GX dashboard.

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

the-doon avatar image
the-doon answered ·

I have 3 of 100/30 SmartSolars connected together in a VE.Smart network and there is a network total figure that is shown in any of the controllers through the app.

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

the-doon avatar image
the-doon answered ·

b7ae1cbd-5cff-4994-abca-3c56b29cd850.png

Network total power is the total of all 3 controllers.


2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.