question

mats avatar image
mats asked

Best way of integrating a battery switch with a lynx bus

Since Victron refuses to release the visio shapes (on the wrong grounds in my eyes - it has NOT hurt other like Cisco) I cannot provide a sketch which would have explained this better so I will have to try in words instead.

I'm looking for a good design that contains a Power in module first, followed by the shunt VE can module. After that there should be a battery switch and the chain then ends with one or more distributors.


suggestion to the product team: A Lynx power switch would be a nice extension to the product range

system design
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
daniel-suchy avatar image
daniel-suchy answered ·

That would be nice!

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.