question

magicmike avatar image
magicmike asked

MK-3 USB / VEFlash Error at step 'Connect part 2'

Hello,

I have multiplus 40/3000 and my old FW is:

2620158 i believe i need 2620159 with im trying to update.

But having error.

I dont have problem to VeConfig, Victron Connect does not work becouse my FW is to old.

Swapped device, changed ports and all... still no luck.


Tried to google solution but cant find any,


I want to update FW and go with Generator configuration as every 60 sec there is a swap between charger to inverter.


untitled.png

I've tried another ethernet port and no luck still.

I'm under off grid so I only has batteries connected.

firmware updateMK3
untitled.png (9.4 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Paul B avatar image
Paul B answered ·

The fW to go up to is 2620486

also MAKE sure you do not have ANY other devices connected to the VE bus port only the MK2 unit

4 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

magicmike avatar image magicmike commented ·

Ok! i ll try again tomorrow. Thank you!
But i cannot find 2620486 at all on V-Professional.

0 Likes 0 ·
Matthias Lange - DE avatar image Matthias Lange - DE ♦ magicmike commented ·
487 should be the latest version by now.
0 Likes 0 ·
wkirby avatar image wkirby ♦♦ magicmike commented ·
2620487 is there now, use that one.
0 Likes 0 ·
magicmike avatar image magicmike wkirby ♦♦ commented ·
ok! i ll try in morning :)
0 Likes 0 ·
magicmike avatar image
magicmike answered ·

Still having error but I'd say I ll give up. :)

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.