# Latest **URL:** https://community.victronenergy.com/latest.md [Latest](https://community.victronenergy.com/latest.md) · [Categories](https://community.victronenergy.com/categories.md) · [Tags](https://community.victronenergy.com/tags.md) --- ## [Shore Limit above Multiplus 2 rating](https://community.victronenergy.com/t/shore-limit-above-multiplus-2-rating/63946)
**Author:** [@cccharles](https://community.victronenergy.com/u/cccharles)\ **Replies:** 4\ **Last updated:** [14 October 2026 22:12 UTC](https://community.victronenergy.com/t/shore-limit-above-multiplus-2-rating/63946 "2026-10-14T22:12:48Z")
I have an 80A grid connection and a Multiplus 2 5000 which has a 50A passthrough limit. I am using an external CT clamp around grid tails (rather than the internal meter) due to the location of things. I have loads on AC… --- ## [GUIv1 and GUIv2 disagree on the same MPII](https://community.victronenergy.com/t/guiv1-and-guiv2-disagree-on-the-same-mpii/63922)
**Author:** [@ertcom](https://community.victronenergy.com/u/ertcom)\ **Replies:** 11\ **Last updated:** [14 October 2026 22:00 UTC](https://community.victronenergy.com/t/guiv1-and-guiv2-disagree-on-the-same-mpii/63922 "2026-10-14T22:00:33Z")
Hi Everyone. I have MPII ESS with Cerbo GX. I just updated to FW to 3.81 hoping the display inconsistency would be fixed. GUIv1 is correctly displaying the grid and solar. GUIv2 is adding the solar yield to grid. VRM agr… --- ## [Configuration Cerbo GX - ESS](https://community.victronenergy.com/t/configuration-cerbo-gx-ess/63860)
**Author:** [@Derry](https://community.victronenergy.com/u/Derry)\ **Replies:** 17\ **Last updated:** [14 October 2026 21:43 UTC](https://community.victronenergy.com/t/configuration-cerbo-gx-ess/63860 "2026-10-14T21:43:41Z")
Hello, J’ai enfin pu mettre en service mon installation le vendredi dernier 09 Octobre, Il s’agit d’une reprise et remise au normes de l’installation de l’ancien propriétaire. Vous trouverez ci-dessous le schéma de l’i… --- ## [Battery and load protection in the event of a SmartSolar MPPT malfunction](https://community.victronenergy.com/t/protezione-batteria-e-carico-da-malfunzionamento-mppt-dello-smart-solar/63819)
**Author:** [@MRodolfo](https://community.victronenergy.com/u/MRodolfo)\ **Replies:** 22\ **Last updated:** [14 October 2026 20:49 UTC](https://community.victronenergy.com/t/protezione-batteria-e-carico-da-malfunzionamento-mppt-dello-smart-solar/63819 "2026-10-14T20:49:57Z")
Hello everyone, I’ve designed the system as shown in the attached diagram, using components I already own, and would like to protect the whole setup by installing a BatteryProtect. The battery is charged via the SmartSolar MPPT, which… --- ## [Quatro/Multiplus State/Controls incorrect in VRM](https://community.victronenergy.com/t/quatro-multiplus-state-controls-incorrect-in-vrm/63801)
**Author:** [@Wobbly](https://community.victronenergy.com/u/Wobbly)\ **Replies:** 5\ **Last updated:** [14 October 2026 20:09 UTC](https://community.victronenergy.com/t/quatro-multiplus-state-controls-incorrect-in-vrm/63801 "2026-10-14T20:09:45Z")
My Quattro controls and state are not showing correctly in VRM. They are displayed correctly on the local control panel. I have tried disconnecting the device and rebooting the OS so it was no longer detected and deleti… --- ## [MultiPlus II and Quattro as charger-only units](https://community.victronenergy.com/t/multiplus-ii-und-quattro-als-reines-ladegerat/63947)
**Author:** [@Wirl\_STH](https://community.victronenergy.com/u/Wirl_STH)\ **Replies:** 2\ **Last updated:** [14 October 2026 18:55 UTC](https://community.victronenergy.com/t/multiplus-ii-und-quattro-als-reines-ladegerat/63947 "2026-10-14T18:55:36Z")
Hello everyone, I'm having difficulty understanding how the charging logic of the MultiPlus II and Quattro works in conjunction with a Cerbo GX. My main PV system consists of MPPT solar charge controllers and Quattros,… --- ## [Aide consuel](https://community.victronenergy.com/t/aide-consuel/59459)
**Author:** [@Olivier](https://community.victronenergy.com/u/Olivier)\ **Replies:** 11\ **Last updated:** [14 October 2026 18:32 UTC](https://community.victronenergy.com/t/aide-consuel/59459 "2026-10-14T18:32:40Z")
Bonjour, Installation (autoconsommation + stockage, donc XP C15-712-3) : Onduleur hybride Victron EasySolar-II GX 48/5000/70-50, MPPT 250/100 3× Pylontech US3000C (48 V) Champ PV : 2 strings de 5× Jinko 425 W (Isc ≈ 1… --- ## [High cell voltage: Alarm](https://community.victronenergy.com/t/high-cell-voltage-alarm/63645)
**Author:** [@NicoBr](https://community.victronenergy.com/u/NicoBr)\ **Replies:** 25\ **Last updated:** [14 October 2026 17:43 UTC](https://community.victronenergy.com/t/high-cell-voltage-alarm/63645 "2026-10-14T17:43:13Z")
Hallo zusammen. ich bräuchte mal etwas Hilfe bei unserer PV. Wir haben seit einiger Zeit fast täglich mehrfach die Meldung “High cell voltage: Alarm”. Wir haben die Akkus bereits mal für eine ganze Woche geladen geha… --- ## [Quattro-II 48/5000 Fault / No AC Output Following Firmware Upgrade v556 to v560](https://community.victronenergy.com/t/quattro-ii-48-5000-fault-no-ac-output-following-firmware-upgrade-v556-to-v560/63944)
**Author:** [@steve.tonna](https://community.victronenergy.com/u/steve.tonna)\ **Replies:** 0\ **Last updated:** [14 October 2026 17:36 UTC](https://community.victronenergy.com/t/quattro-ii-48-5000-fault-no-ac-output-following-firmware-upgrade-v556-to-v560/63944 "2026-10-14T17:36:41Z")
Hi All, Looking for assistance with a Quattro-II 48/5000/70-2x50 (Product ID 2651) that has stopped working following a firmware upgrade from v556 to v560 through VRM. The unit was working normally before the upgrade b… --- ## [Displaying generation and consumption in the VRM Portal](https://community.victronenergy.com/t/darstellung-erzeugung-und-verbrauch-im-vrm-portal/63942)
**Author:** [@Ems-Sonne](https://community.victronenergy.com/u/Ems-Sonne)\ **Replies:** 0\ **Last updated:** [14 October 2026 17:05 UTC](https://community.victronenergy.com/t/darstellung-erzeugung-und-verbrauch-im-vrm-portal/63942 "2026-10-14T17:05:04Z")
Hi everyone :slight\_smile: from what I can see in my “preview”, these “one-day” power curves are clearly available. For both the loads and the solar yield. I’d basically need them … --- ## [Multiplus II 5000 on-grid charger off](https://community.victronenergy.com/t/multiplus-ii-5000-on-grid-charger-off/63879)
**Author:** [@Logic28](https://community.victronenergy.com/u/Logic28)\ **Replies:** 19\ **Last updated:** [14 October 2026 16:32 UTC](https://community.victronenergy.com/t/multiplus-ii-5000-on-grid-charger-off/63879 "2026-10-14T16:32:35Z")
Is there a way to selectively stop/pause the internal battery charger wile AC1 in is active and feeding the loads while the inverter is set to the “ON” mode without interfering with the Amperage, just a simple charger On… --- ## [Want to write about Home Battery Systems for Victron Energy?](https://community.victronenergy.com/t/want-to-write-about-home-battery-systems-for-victron-energy/63941)
**Author:** [@dkerver](https://community.victronenergy.com/u/dkerver)\ **Replies:** 0\ **Last updated:** [14 October 2026 15:28 UTC](https://community.victronenergy.com/t/want-to-write-about-home-battery-systems-for-victron-energy/63941 "2026-10-14T15:28:27Z")
Victron Energy is looking for a parttime, self-employed technical content writer with in-depth knowledge of home battery systems. Do you enjoy creating savvy and appealing knowledge articles for our end-consumers, then … --- ## [Android GX Display v1.3 released](https://community.victronenergy.com/t/android-gx-display-v1-3-released/63557)
**Author:** [@jperez](https://community.victronenergy.com/u/jperez)\ **Replies:** 15\ **Last updated:** [14 October 2026 15:23 UTC](https://community.victronenergy.com/t/android-gx-display-v1-3-released/63557 "2026-10-14T15:23:43Z")
Hi all, Version 1.3 of the Android GX Display app is available. It is a maintenance release that fixes the three problems reported here after v1.2. There are no new features. How to get it Displays with automatic upda… --- ## [Orion XS 50A error No. 2](https://community.victronenergy.com/t/orion-xs-50a-fehler-nr-2/63940)
**Author:** [@TKMax](https://community.victronenergy.com/u/TKMax)\ **Replies:** 0\ **Last updated:** [14 October 2026 14:50 UTC](https://community.victronenergy.com/t/orion-xs-50a-fehler-nr-2/63940 "2026-10-14T14:50:09Z")
Hello, I have a problem with the above-mentioned device. It worked without any problems for 3.5 months. For some time now, error no. 2 – battery voltage too high – has been displayed. Specifically: Input voltage 14.0V Current 5.8A Power 81W … --- ## [Setting up Dynamic ESS for the first time: maximum discharge power / maximum charge power](https://community.victronenergy.com/t/dynamic-ess-voor-het-eerst-instellen-maximum-ontlaadvermogen-maximaal-laadvermogen/63752)
**Author:** [@Jeroenxx](https://community.victronenergy.com/u/Jeroenxx)\ **Replies:** 13\ **Last updated:** [14 October 2026 14:40 UTC](https://community.victronenergy.com/t/dynamic-ess-voor-het-eerst-instellen-maximum-ontlaadvermogen-maximaal-laadvermogen/63752 "2026-10-14T14:40:53Z")
After reading various manuals and searching extensively online, I still can’t figure out the right way to set the maximum discharge power and maximum charging power in Dynamic ESS… --- ## [GX IO-Extender 150: digital outputs switch on for 4s at every GX startup](https://community.victronenergy.com/t/gx-io-extender-150-digital-outputs-switch-on-for-4s-at-every-gx-startup/63787)
**Author:** [@Barentsailor](https://community.victronenergy.com/u/Barentsailor)\ **Replies:** 6\ **Last updated:** [14 October 2026 14:32 UTC](https://community.victronenergy.com/t/gx-io-extender-150-digital-outputs-switch-on-for-4s-at-every-gx-startup/63787 "2026-10-14T14:32:18Z")
Hello, My GX IO-Extender 150 switches its digital outputs ON for about 4 seconds every time the Cerbo GX reboots, then they go back OFF. On an output driving an optocoupler: the equipment behind it was triggered on each… --- ## [Looking for a technician in the Palermo area](https://community.victronenergy.com/t/cercasi-tecnico-zona-palermo/63724)
**Author:** [@zuklic](https://community.victronenergy.com/u/zuklic)\ **Replies:** 32\ **Last updated:** [14 October 2026 13:50 UTC](https://community.victronenergy.com/t/cercasi-tecnico-zona-palermo/63724 "2026-10-14T13:50:35Z")
Hi everyone, I have a system installed on a houseboat (solar panels + battery storage), but since switching from a Pylontech battery to Basengreen batteries, I can’t configure the system properly any more… --- ## [Automatically start the MultiPlus battery charger mode based on SOC using a BMV712!](https://community.victronenergy.com/t/demarage-du-monde-chargeur-de-batterie-du-multiplus-automatiquement-en-fonction-du-soc-par-bmv712/63890)
**Author:** [@Cameleon](https://community.victronenergy.com/u/Cameleon)\ **Replies:** 8\ **Last updated:** [14 October 2026 13:26 UTC](https://community.victronenergy.com/t/demarage-du-monde-chargeur-de-batterie-du-multiplus-automatiquement-en-fonction-du-soc-par-bmv712/63890 "2026-10-14T13:26:46Z")
Hybrid system, 24 Eco-Worthy 195-watt solar panels MultiPlus 2000 watts, with integrated 12-volt 80-amp charger 3 Victron MPPT 150/85 Cerbo-S GX and GX Touch 50 screen; the whole system is connected via Bluetooth and cellular… --- ## [Feed\_in not allowed behaviour in 3-phase grid connection, Multi RS Solar](https://community.victronenergy.com/t/feed-in-not-allowed-behaviour-in-3-phase-grid-connection-multi-rs-solar/59569)
**Author:** [@FransvN](https://community.victronenergy.com/u/FransvN)\ **Replies:** 14\ **Last updated:** [14 October 2026 12:26 UTC](https://community.victronenergy.com/t/feed-in-not-allowed-behaviour-in-3-phase-grid-connection-multi-rs-solar/59569 "2026-10-14T12:26:03Z")
I have a 3-phase connection, and RS6000 connected to phase 1. While charging the battery by PV, the RS compensates the use of electricity on phase 2 and 3. When I set Feed\_In to Not Allowed, the RS does not compensate f… --- ## [Mystery Consumption in VRM - how to troubleshoot?](https://community.victronenergy.com/t/mystery-consumption-in-vrm-how-to-troubleshoot/60853)
**Author:** [@Buzzy](https://community.victronenergy.com/u/Buzzy)\ **Replies:** 9\ **Last updated:** [14 October 2026 12:16 UTC](https://community.victronenergy.com/t/mystery-consumption-in-vrm-how-to-troubleshoot/60853 "2026-10-14T12:16:09Z")
This morning VRM showed me 1kW consumption at around 6am. Nothing is connected that could possibly use that. The advanced tab does not show anything like that. How can I trouble shoot this? The system is not grid … --- ## [VRM release notes 14-10-2026](https://community.victronenergy.com/t/vrm-release-notes-14-10-2026/63938)
**Author:** [@Barbara](https://community.victronenergy.com/u/Barbara)\ **Replies:** 0\ **Last updated:** [14 October 2026 12:08 UTC](https://community.victronenergy.com/t/vrm-release-notes-14-10-2026/63938 "2026-10-14T12:08:02Z")
Hi all, I would love to share with you the latest changes that were just added to production VRM: Dynamic ESS: users with read-only access to an installation can now see the Dynamic ESS settings. They cannot change a… --- ## [Planning a PV expansion with E3DC and Victron](https://community.victronenergy.com/t/planung-pv-erweiterung-e3dc-mit-victron/63936)
**Author:** [@MaxPower2kW](https://community.victronenergy.com/u/MaxPower2kW)\ **Replies:** 0\ **Last updated:** [14 October 2026 11:43 UTC](https://community.victronenergy.com/t/planung-pv-erweiterung-e3dc-mit-victron/63936 "2026-10-14T11:43:15Z")
Hi everyone I'd like to expand my existing solar PV system Here’s the current setup: Existing system installed in 2018: E3DC S10E with 9.9 kWp of PV capacity and 13 kWh of storage I’d like to expand/reconfigure the system… --- ## [Multiplus 24V 800VA feed-in](https://community.victronenergy.com/t/multiplus-24v-800va-feed-in/63908)
**Author:** [@glushko.mikhail](https://community.victronenergy.com/u/glushko.mikhail)\ **Replies:** 7\ **Last updated:** [14 October 2026 11:41 UTC](https://community.victronenergy.com/t/multiplus-24v-800va-feed-in/63908 "2026-10-14T11:41:04Z")
A question for the experts: Is it possible to configure the Multiplus 24V 800VA to feed-in (feed energy back into the grid) without an additional GX device? --- ## [Request: make Spot market price available for DESS in Spain](https://community.victronenergy.com/t/request-make-spot-market-price-available-for-dess-in-spain/63935)
**Author:** [@AlbertoCornes](https://community.victronenergy.com/u/AlbertoCornes)\ **Replies:** 0\ **Last updated:** [14 October 2026 11:20 UTC](https://community.victronenergy.com/t/request-make-spot-market-price-available-for-dess-in-spain/63935 "2026-10-14T11:20:29Z")
Hello Victron staff, I’ve just set up a Victron system in Spain. When trying to configure the DESS pricing, I could only find in Spain the “P” related to PVPC prices. But I didn’t manage to find the spot market pricing … --- ## [MultiPlus-II 4k5 + one Dyness DL5.0C Pro shuts down on grid loss with Low Battery and High DC Ripple](https://community.victronenergy.com/t/multiplus-ii-4k5-one-dyness-dl5-0c-pro-shuts-down-on-grid-loss-with-low-battery-and-high-dc-ripple/63933)
**Author:** [@Oleksiy](https://community.victronenergy.com/u/Oleksiy)\ **Replies:** 7\ **Last updated:** [14 October 2026 10:45 UTC](https://community.victronenergy.com/t/multiplus-ii-4k5-one-dyness-dl5-0c-pro-shuts-down-on-grid-loss-with-low-battery-and-high-dc-ripple/63933 "2026-10-14T10:45:51Z")
Hello everyone, I need help diagnosing a grid-loss issue with the following system: MultiPlus-II 4k5 1 × Dyness DL5.0C Pro, 51.2 V / 100 Ah SmartSolar MPPT 150/45 ESS installation During some scheduled grid outages i… --- ## [How do you access EVCS schedules from VRM](https://community.victronenergy.com/t/how-do-you-access-evcs-schedules-from-vrm/63891)
**Author:** [@Richardweir77](https://community.victronenergy.com/u/Richardweir77)\ **Replies:** 6\ **Last updated:** [14 October 2026 10:43 UTC](https://community.victronenergy.com/t/how-do-you-access-evcs-schedules-from-vrm/63891 "2026-10-14T10:43:54Z")
I want to be able to view and change my EV charging schedules via VRM but this function is not available on my system. I have to physically stand next to the EVCS and connect as a local connection. Is this something that… --- ## [Orion XS only 120 watts](https://community.victronenergy.com/t/orion-xs-only-120-watts/63654)
**Author:** [@Beavo](https://community.victronenergy.com/u/Beavo)\ **Replies:** 20\ **Last updated:** [14 October 2026 10:03 UTC](https://community.victronenergy.com/t/orion-xs-only-120-watts/63654 "2026-10-14T10:03:52Z")
Hi. I have a Victron Orion XS 50A DC/DC Charger – 12/12 Non-Isolated Battery To Battery Charger. It is connected to my Ford Transit Custom battery and is to be used to charge an AFERIY P280 2800W 2048Wh Portable Power S… --- ## [Looking for beta testers for dynamic ESS smart EV charging](https://community.victronenergy.com/t/looking-for-beta-testers-for-dynamic-ess-smart-ev-charging/62261)
**Author:** [@Barbara](https://community.victronenergy.com/u/Barbara)\ **Replies:** 2\ **Last updated:** [14 October 2026 10:00 UTC](https://community.victronenergy.com/t/looking-for-beta-testers-for-dynamic-ess-smart-ev-charging/62261 "2026-10-14T10:00:44Z")
Hi there! We are ready to start beta testing for the feature where Dynamic ESS charges your car at the most optimal time of the day. If you would want to join this beta group, you should check off all of these requireme… --- ## [Fault condition during microgrid operation](https://community.victronenergy.com/t/fault-condition-during-microgrid-operation/57180)
**Author:** [@JNM](https://community.victronenergy.com/u/JNM)\ **Replies:** 22\ **Last updated:** [14 October 2026 08:05 UTC](https://community.victronenergy.com/t/fault-condition-during-microgrid-operation/57180 "2026-10-14T08:05:00Z")
Hello, For some time now, I’ve been testing and using the new microgrid system, and I hadn’t encountered any major problems until now. Fews days ago, one of my Victron system fell down during operation and indicated “F… --- ## [Could someone with experience set up OMIE purchase prices for ESS-dynamic with Node-RED for me?](https://community.victronenergy.com/t/alguien-con-experiencia-puede-configurarme-precios-de-compra-omie-para-ess-dynamic-con-node-red/63296)
**Author:** [@PACORIUS](https://community.victronenergy.com/u/PACORIUS)\ **Replies:** 11\ **Last updated:** [14 October 2026 07:50 UTC](https://community.victronenergy.com/t/alguien-con-experiencia-puede-configurarme-precios-de-compra-omie-para-ess-dynamic-con-node-red/63296 "2026-10-14T07:50:24Z")
Hello everyone, I recently discovered this community, and I'm asking for help, happy to pay a fee if necessary. The thing is, I have my installation working perfectly with my Ekrano and my MultiplusII, I have enabled… [Next page](https://community.victronenergy.com/latest.md?page=1)