question

nonop4 avatar image
nonop4 asked

Quattro and Fronius

Hello, I have an association problem between my quattro victron and a Fronius

All conditons are programmed on the fronius and the quattro but the screen of the controller always displays an injection in the grid

It is well configured in zero grid injection

victron products
1 comment
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Please post a wiring diagram of your system.

0 Likes 0 ·
3 Answers
nonop4 avatar image
nonop4 answered ·

The schema of my installation is as follows:


2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

boekel avatar image
boekel answered ·

Make sure you correctly setup the inverter location in the settings.

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

nonop4 avatar image
nonop4 answered ·

Hi,

The inverter fronius is configured in MG 50hz, Zéro injection Fronius is active on the ccgx victron :


I may be forgetting something ?


In order to recover the power of the Fronius for my batterries I have (for example 1800w) to set "limit load power" to 1800w, otherwise I lose in the grid the power of the fronius

without this function the Fronius decreases the power of the Pvs


2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic