question

doublebubble avatar image
doublebubble asked

12/3000/120 Multiplus going from float back to absorption

Can anyone tell me why a Multiplus 12/3000/120 would go from float back to absorption? It's only been in float for about an hr and switched back to absorption, is there an issue with the unit?

battery charging
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
harold avatar image
harold answered ·

Hi @doublebubble

Depending on your selected battery type, the Algoritme will define the charging settings.

In Lead Acid, once per week, 1 hr of absorption is done, toe keep your battery fully charged!

Harold

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Justin Cook avatar image
Justin Cook answered ·

@doublebubble, are you running any DC loads from your battery? This is one reason the unit may switch back into absorption. And @Harold's comment is valid as well.

What else is on your system, what kinds of batteries, what are your MultiPlus settings, and what loads were running when you observed this?

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic