Hello, I have an EasySolar 24/3000 / 70-50 MPPT150 / 70 and in the parameter ess appears nothing, my question is if I add a BMV700, it will appear in the wizard as ess. And thus parameterize the use of surplus PV.

Question

question

dids asked Nov 21, '19

Hello, I have an EasySolar 24/3000 / 70-50 MPPT150 / 70 and in the parameter ess appears nothing, my question is if I add a BMV700, it will appear in the wizard as ess. And thus parameterize the use of surplus PV.

EasySolar All-in-One

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Modifications Space

Node Red Space

Answer 1 · 2019-11-22T09:36:21Z

Murray van Graan answered · Nov 22, 2019 at 09:36 AM

If nothing shows under ESS, then adding a BMV would not help. It sounds like the inverter hasn’t been programmed with the ESS assistant, or the inverter is switched off

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

question