question

rvpost avatar image
rvpost asked

whitch interface can be used with phoenix multi compact

firmware 180633.VFF, apparently no VE.bus. Has only the remote control rj45 connector.

Which interface to usb can I use with the vconfigure software? Is it Mk2.2b or mk3?

firmware updaters485
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

3 Answers
Daniël Boekel (Victron Energy Staff) avatar image
Daniël Boekel (Victron Energy Staff) answered ·

Hi @rvpost

Are you sure it's just 6 digits?

if it's 18xxxxx (7 digits) then you can use an MK2 and VE.Config or Victron Connect.
(edited: I incorrectly wrote that MK3 was compatible.)


see also:

https://www.victronenergy.com/upload/documents/manual-VE.Bus-firmware-versions-explained-EN.pdf

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

rvpost avatar image
rvpost answered ·

Thanks,

Appears I missed a diget, it is actually 1806133.VFF.

That should mean it is MK3 compatible.


2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Daniël Boekel (Victron Energy Staff) avatar image
Daniël Boekel (Victron Energy Staff) answered ·

Hi @rvpost

My apologies, I gave an incorrect answer before... 18xx is older and needs MK2...

I'll change my first answer...

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.