question

steve-tucker avatar image
steve-tucker asked

electric bike charging

I have the MPPT 100/20 controller but have never used the load output. The controller had two 100w solar panels connected and I seek any advice on how to connect a charger to the load output for a 36v electric bike charger. How feasible is the by connecting a 12v to 36v DC TO DC converter please?

battery charging
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
wkirby avatar image
wkirby answered ·

It would probably be better to connect the bike charger directly to the 12V battery rather than the load output. You might find the bike charger overloads the load output.

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

steve-tucker avatar image
steve-tucker answered ·

Ok thank you for that I was trying to keep the charging of the bike batteries separate from the leisure batteries, so there is no practical use of the MPPT load output for this use case then?

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic