question

botessj avatar image
botessj asked

Where or how do I software lower the kva output of my Quattro?

As a result of municipal legislation, I need to limit the output of my 10Kva Quattro to approximately 4kVa maximum. I believe that this can be done by means of the software, but cannot seem to find the exact settings I need. Could somebody please assist

VEConfigure 3
1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Murray van Graan avatar image Murray van Graan commented ·

Do you need to limit the amount of power fed back to the municipality? If yes, it could be done in the ESS settings but we need a bit more info about the system. PV array size, the way the system is set up etc

0 Likes 0 ·
1 Answer
Matthias Lange - DE avatar image
Matthias Lange - DE answered ·

As far as I know there is no setting to limit the output current/power.

You can activate/deactivate an internal relay if the output power is over/under a specific value but I don't know how you could use such a signal.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.