question

Ole Saether avatar image
Ole Saether asked

MultiPlus and Phoenix VE.Direct connected to Venus GX at the same time?

Is it possible to have a MultiPlus and Phoenix VE.Direct inverter connected to Venus GX at the same time? Sometimes only one of them will be on.

Phoenix InverterVenus GX - VGX
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Martijn Coster (Victron Energy Staff) avatar image
Martijn Coster (Victron Energy Staff) answered ·

@osaether You can connect both products at the same time and have both on at the same time. Both will show up in the device list. The overview screen will not work as expected.
The inverter will not be shown there. The MultiPlus will be shown there when it is turned on

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Ole Saether avatar image Ole Saether commented ·

@Martijn Coster (Victron Energy Staff)
I tried today and the inverter is shown on the main screen in Venus. I can also turn it on/off in the menu. The MultiPlus is shown as well.

The power consumption is shown as zero even when I have around 50W drawn from it. Is this a known issue? I have upgraded it to the latest firmware, v1.12.

0 Likes 0 ·
phoenix.jpg (42.3 KiB)