question

Allan Yates avatar image
Allan Yates asked

Shunt Hole Spacing?

Does somebody have the distance between the mounting holes on the Victron 500A shunt?



Thanks,


Allan.

VRM
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
dwmarine avatar image
dwmarine answered ·

Victron shunt# SHU500050100

Base mounting holes are 4inches or 101.6mm hole centres and 6mm ID.

Cable mountings are 2.25inch hole centres, (57mm) and M10x1.5mm thread.

the small screw holes are 58.8mm centre to centre.

Hope this is what you are after.

Cheers, Darren


1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Allan Yates avatar image Allan Yates commented ·

Thanks! The 4" (101.6mm) was the figure I needed.



Allan.

0 Likes 0 ·